From: Suresh Thiagarajan <suresh.thiagara...@pmcs.com>

During hibernation, the HBA firmware may lose power and forget the device
id info.   This causes the HBA to reject IO upon resume.   The fix is
to call the libsas power management routines to make the domain device
forgetful.

This fixes bug 76681: https://bugzilla.kernel.org/show_bug.cgi?id=76681

Signed-off-by: Bradley Grove <bgr...@attotech.com>
Acked-by: Jack Wang <xjtu...@gmail.com>
---
 drivers/scsi/pm8001/pm8001_init.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_init.c 
b/drivers/scsi/pm8001/pm8001_init.c
index c4f31b2..86cf03a 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -957,6 +957,7 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, 
pm_message_t state)
        int  i, j;
        u32 device_state;
        pm8001_ha = sha->lldd_ha;
+       sas_suspend_ha(sha);
        flush_workqueue(pm8001_wq);
        scsi_block_requests(pm8001_ha->shost);
        if (!pdev->pm_cap) {
@@ -1006,6 +1007,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
        int rc;
        u8 i = 0, j;
        u32 device_state;
+       DECLARE_COMPLETION_ONSTACK(completion);
        pm8001_ha = sha->lldd_ha;
        device_state = pdev->current_state;
 
@@ -1026,7 +1028,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
        rc = pci_go_44(pdev);
        if (rc)
                goto err_out_disable;
-
+       sas_prep_resume_ha(sha);
        /* chip soft rst only for spc */
        if (pm8001_ha->chip_id == chip_8001) {
                PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
@@ -1058,7 +1060,13 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
                for (i = 1; i < pm8001_ha->number_of_intr; i++)
                        PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
        }
-       scsi_unblock_requests(pm8001_ha->shost);
+       pm8001_ha->flags = PM8001F_RUN_TIME;
+       for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+               pm8001_ha->phy[i].enable_completion = &completion;
+               PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+               wait_for_completion(&completion);
+       }
+       sas_resume_ha(sha);
        return 0;
 
 err_out_disable:
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to