On 06/25/2014 06:51 PM, Christoph Hellwig wrote:
Seems like these counters are missing any sort of synchronization for
updates, as a over 10 year old comment from me noted. Fix this by
using atomic counters, and while we're at it also make sure they are
in the same cacheline as the _busy counters and not needlessly stored
to in every I/O completion.
With the new model the _busy counters can temporarily go negative,
so all the readers are updated to check for > 0 values. Longer
term every successful I/O completion will reset the counters to zero,
so the temporarily negative values will not cause any harm.
Signed-off-by: Christoph Hellwig <h...@lst.de>
---
drivers/scsi/scsi.c | 21 ++++++------
drivers/scsi/scsi_lib.c | 82 +++++++++++++++++++++-----------------------
drivers/scsi/scsi_sysfs.c | 10 +++++-
include/scsi/scsi_device.h | 7 ++--
include/scsi/scsi_host.h | 7 ++--
5 files changed, 64 insertions(+), 63 deletions(-)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 35a23e2..b362058 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -729,17 +729,16 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
scsi_device_unbusy(sdev);
- /*
- * Clear the flags which say that the device/host is no longer
- * capable of accepting new commands. These are set in scsi_queue.c
- * for both the queue full condition on a device, and for a
- * host full condition on the host.
- *
- * XXX(hch): What about locking?
- */
- shost->host_blocked = 0;
- starget->target_blocked = 0;
- sdev->device_blocked = 0;
+ /*
+ * Clear the flags which say that the device/target/host is no longer
+ * capable of accepting new commands.
+ */
+ if (atomic_read(&shost->host_blocked))
+ atomic_set(&shost->host_blocked, 0);
+ if (atomic_read(&starget->target_blocked))
+ atomic_set(&starget->target_blocked, 0);
+ if (atomic_read(&sdev->device_blocked))
+ atomic_set(&sdev->device_blocked, 0);
/*
* If we have valid sense information, then some kind of recovery
Hmm. I guess there is a race window between
atomic_read() and atomic_set().
Doesn't this cause issues when someone calls atomic_set() just
before the call to atomic_read?
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e23fef5..a39d5ba 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -99,14 +99,16 @@ scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
*/
switch (reason) {
case SCSI_MLQUEUE_HOST_BUSY:
- host->host_blocked = host->max_host_blocked;
+ atomic_set(&host->host_blocked, host->max_host_blocked);
break;
case SCSI_MLQUEUE_DEVICE_BUSY:
case SCSI_MLQUEUE_EH_RETRY:
- device->device_blocked = device->max_device_blocked;
+ atomic_set(&device->device_blocked,
+ device->max_device_blocked);
break;
case SCSI_MLQUEUE_TARGET_BUSY:
- starget->target_blocked = starget->max_target_blocked;
+ atomic_set(&starget->target_blocked,
+ starget->max_target_blocked);
break;
}
}
@@ -351,30 +353,39 @@ static void scsi_single_lun_run(struct scsi_device
*current_sdev)
spin_unlock_irqrestore(shost->host_lock, flags);
}
-static inline int scsi_device_is_busy(struct scsi_device *sdev)
+static inline bool scsi_device_is_busy(struct scsi_device *sdev)
{
if (atomic_read(&sdev->device_busy) >= sdev->queue_depth)
- return 1;
- if (sdev->device_blocked)
- return 1;
+ return true;
+ if (atomic_read(&sdev->device_blocked) > 0)
+ return true;
return 0;
}
-static inline int scsi_target_is_busy(struct scsi_target *starget)
+static inline bool scsi_target_is_busy(struct scsi_target *starget)
{
- return ((starget->can_queue > 0 &&
- atomic_read(&starget->target_busy) >= starget->can_queue) ||
- starget->target_blocked);
+ if (starget->can_queue > 0) {
+ if (atomic_read(&starget->target_busy) >= starget->can_queue)
+ return true;
+ if (atomic_read(&starget->target_blocked) > 0)
+ return true;
+ }
+
+ return false;
}
-static inline int scsi_host_is_busy(struct Scsi_Host *shost)
+static inline bool scsi_host_is_busy(struct Scsi_Host *shost)
{
- if ((shost->can_queue > 0 &&
- atomic_read(&shost->host_busy) >= shost->can_queue) ||
- shost->host_blocked || shost->host_self_blocked)
- return 1;
+ if (shost->can_queue > 0) {
+ if (atomic_read(&shost->host_busy) >= shost->can_queue)
+ return true;
+ if (atomic_read(&shost->host_blocked) > 0)
+ return true;
+ if (shost->host_self_blocked)
+ return true;
+ }
- return 0;
+ return false;
}
static void scsi_starved_list_run(struct Scsi_Host *shost)
@@ -1283,11 +1294,8 @@ static inline int scsi_dev_queue_ready(struct
request_queue *q,
unsigned int busy;
busy = atomic_inc_return(&sdev->device_busy) - 1;
- if (busy == 0 && sdev->device_blocked) {
- /*
- * unblock after device_blocked iterates to zero
- */
- if (--sdev->device_blocked != 0) {
+ if (busy == 0 && atomic_read(&sdev->device_blocked) > 0) {
+ if (atomic_dec_return(&sdev->device_blocked) > 0) {
blk_delay_queue(q, SCSI_QUEUE_DELAY);
goto out_dec;
}
@@ -1297,7 +1305,7 @@ static inline int scsi_dev_queue_ready(struct
request_queue *q,
if (busy >= sdev->queue_depth)
goto out_dec;
- if (sdev->device_blocked)
+ if (atomic_read(&sdev->device_blocked) > 0)
goto out_dec;
return 1;
@@ -1328,16 +1336,9 @@ static inline int scsi_target_queue_ready(struct
Scsi_Host *shost,
}
busy = atomic_inc_return(&starget->target_busy) - 1;
- if (busy == 0 && starget->target_blocked) {
- /*
- * unblock after target_blocked iterates to zero
- */
- spin_lock_irq(shost->host_lock);
- if (--starget->target_blocked != 0) {
- spin_unlock_irq(shost->host_lock);
+ if (busy == 0 && atomic_read(&starget->target_blocked) > 0) {
+ if (atomic_dec_return(&starget->target_blocked) > 0)
goto out_dec;
- }
- spin_unlock_irq(shost->host_lock);
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
@@ -1345,7 +1346,7 @@ static inline int scsi_target_queue_ready(struct
Scsi_Host *shost,
if (starget->can_queue > 0 && busy >= starget->can_queue)
goto starved;
- if (starget->target_blocked)
+ if (atomic_read(&starget->target_blocked) > 0)
goto starved;
return 1;
@@ -1374,16 +1375,9 @@ static inline int scsi_host_queue_ready(struct
request_queue *q,
return 0;
busy = atomic_inc_return(&shost->host_busy) - 1;
- if (busy == 0 && shost->host_blocked) {
- /*
- * unblock after host_blocked iterates to zero
- */
- spin_lock_irq(shost->host_lock);
- if (--shost->host_blocked != 0) {
- spin_unlock_irq(shost->host_lock);
+ if (busy == 0 && atomic_read(&shost->host_blocked) > 0) {
+ if (atomic_dec_return(&shost->host_blocked) > 0)
goto out_dec;
- }
- spin_unlock_irq(shost->host_lock);
SCSI_LOG_MLQUEUE(3,
shost_printk(KERN_INFO, shost,
Same with this one.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
h...@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
