On Tue, Jun 17, 2014 at 5:58 PM, Jack Wang <xjtu...@gmail.com> wrote:
> On 06/17/2014 01:15 PM, Maurizio Lombardi wrote:
>> The pm8001_get_phy_settings_info() function does not check
>> the kzalloc() return value and does not free the allocated memory.
>>
>> Signed-off-by: Maurizio Lombardi <mlomb...@redhat.com>
>
> Looks good, thanks
> Acked-by: Jack Wang <xjtu...@gmail.com>
Looks good, Thanks Maurizio
Acked-by: Suresh Thiagarajan <suresh.thiagara...@pmcs.com>
>> ---
>> drivers/scsi/pm8001/pm8001_init.c | 13 ++++++++++---
>> 1 file changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/scsi/pm8001/pm8001_init.c
>> b/drivers/scsi/pm8001/pm8001_init.c
>> index c4f31b21..e90c89f 100644
>> --- a/drivers/scsi/pm8001/pm8001_init.c
>> +++ b/drivers/scsi/pm8001/pm8001_init.c
>> @@ -677,7 +677,7 @@ static void pm8001_init_sas_add(struct pm8001_hba_info
>> *pm8001_ha)
>> * pm8001_get_phy_settings_info : Read phy setting values.
>> * @pm8001_ha : our hba.
>> */
>> -void pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
>> +static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
>> {
>>
>> #ifdef PM8001_READ_VPD
>> @@ -691,11 +691,15 @@ void pm8001_get_phy_settings_info(struct
>> pm8001_hba_info *pm8001_ha)
>> payload.offset = 0;
>> payload.length = 4096;
>> payload.func_specific = kzalloc(4096, GFP_KERNEL);
>> + if (!payload.func_specific)
>> + return -ENOMEM;
>> /* Read phy setting values from flash */
>> PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
>> wait_for_completion(&completion);
>> pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
>> + kfree(payload.func_specific);
>> #endif
>> + return 0;
>> }
>>
>> #ifdef PM8001_USE_MSIX
>> @@ -879,8 +883,11 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
>> pm8001_init_sas_add(pm8001_ha);
>> /* phy setting support for motherboard controller */
>> if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
>> - pdev->subsystem_vendor != 0)
>> - pm8001_get_phy_settings_info(pm8001_ha);
>> + pdev->subsystem_vendor != 0) {
>> + rc = pm8001_get_phy_settings_info(pm8001_ha);
>> + if (rc)
>> + goto err_out_shost;
>> + }
>> pm8001_post_sas_ha_init(shost, chip);
>> rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
>> if (rc)
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
