The PCI register read checking introduced in commit f3ddac19 "qla2xxx:
Disable adapter when we encounter a PCI disconnect" is active during
driver probe. Hold off scheduling any board removal until the driver
probe has completed. This ensures that the the board_disable work
structure is initialized and more importantly, avoids racing
qla2x00_probe_one.
Signed-off-by: Joe Lawrence <joe.lawre...@stratus.com>
---
drivers/scsi/qla2xxx/qla_def.h | 1 +
drivers/scsi/qla2xxx/qla_isr.c | 3 ++-
drivers/scsi/qla2xxx/qla_os.c | 2 ++
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 7c441c9..253a89d 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3405,6 +3405,7 @@ typedef struct scsi_qla_host {
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
#define PFLG_DRIVER_REMOVING 1 /* PCI driver .remove */
+#define PFLG_DRIVER_PROBING 2 /* PCI driver .probe */
uint32_t device_flags;
#define SWITCH_FOUND BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ee5eef4..4ea8252 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -118,7 +118,8 @@ qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *vha,
uint32_t reg)
/* Check for PCI disconnection */
if (reg == 0xffffffff) {
if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags) &&
- !test_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags)) {
+ !test_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags) &&
+ !test_bit(PFLG_DRIVER_PROBING, &vha->pci_flags)) {
/*
* Schedule this (only once) on the default system
* workqueue so that all the adapter workqueues and the
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 51cba37..0b39425 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2629,6 +2629,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct
pci_device_id *id)
}
pci_set_drvdata(pdev, base_vha);
+ set_bit(PFLG_DRIVER_PROBING, &base_vha->pci_flags);
host = base_vha->host;
base_vha->req = req;
@@ -2920,6 +2921,7 @@ skip_dpc:
qlt_add_target(ha, base_vha);
+ clear_bit(PFLG_DRIVER_PROBING, &base_vha->pci_flags);
return 0;
probe_init_failed:
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
