On 05/24/2014 12:13 PM, Paul Bolle wrote:
The acornscsi driver was added in v2.1.88. It has always #undef-ed
CONFIG_SCSI_ACORNSCSI_LINK near the top of acornscsi.c. And, just to be
sure, it has also always triggered a preprocessor error if
CONFIG_SCSI_ACORNSCSI_LINK was still defined. But, as far as I can see,
it has never even been possible to set SCSI_ACORNSCSI_LINK through
kconfig, or its predecessors, in the first place.
Let's remove the code involved.
Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
---
Untested.
Also interesting: SCSI_ACORNSCSI_TAGGED_QUEUE can be set through
kconfig, but its macro will be #undef-ed at the top of acornscsi.c. I
suppose that #undef could be dropped.
And finally: CONFIG_ACORNSCSI_CONSTANTS has to be set manually. But if
we'd just drop the CONFIG_ prefix acornscsi.c would become a pet peeve
free zone.
drivers/scsi/arm/acornscsi.c | 53 --------------------------------------------
1 file changed, 53 deletions(-)
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 059ff477a398..2e797a367608 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -62,13 +62,6 @@
*/
#undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
/*
- * SCSI-II Linked command support.
- *
- * The higher level code doesn't support linked commands yet, and so the option
- * is undef'd here.
- */
-#undef CONFIG_SCSI_ACORNSCSI_LINK
-/*
* SCSI-II Synchronous transfer support.
*
* Tried and tested...
@@ -160,10 +153,6 @@
#error "Yippee! ABORT TAG is now defined! Remove this error!"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-#error SCSI2 LINKed commands not supported (yet)!
-#endif
-
#ifdef USE_DMAC
/*
* DMAC setup parameters
@@ -1668,42 +1657,6 @@ void acornscsi_message(AS_Host *host)
}
break;
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /*
- * We don't support linked commands yet
- */
- if (0) {
-#if (DEBUG & DEBUG_LINK)
- printk("scsi%d.%c: lun %d tag %d linked command complete\n",
- host->host->host_no, acornscsi_target(host),
host->SCpnt->tag);
-#endif
- /*
- * A linked command should only terminate with one of these messages
- * if there are more linked commands available.
- */
- if (!host->SCpnt->next_link) {
- printk(KERN_WARNING "scsi%d.%c: lun %d tag %d linked command
complete, but no next_link\n",
- instance->host_no, acornscsi_target(host),
host->SCpnt->tag);
- acornscsi_sbic_issuecmd(host, CMND_ASSERTATN);
- msgqueue_addmsg(&host->scsi.msgs, 1, ABORT);
- } else {
- struct scsi_cmnd *SCpnt = host->SCpnt;
-
- acornscsi_dma_cleanup(host);
-
- host->SCpnt = host->SCpnt->next_link;
- host->SCpnt->tag = SCpnt->tag;
- SCpnt->result = DID_OK | host->scsi.SCp.Message << 8 |
host->Scsi.SCp.Status;
- SCpnt->done(SCpnt);
-
- /* initialise host->SCpnt->SCp */
- }
- break;
- }
-#endif
-
default: /* reject message */
printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n",
host->host->host_no, acornscsi_target(host),
@@ -2825,9 +2778,6 @@ char *acornscsi_info(struct Scsi_Host *host)
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
" TAG"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- " LINK"
-#endif
#if (DEBUG & DEBUG_NO_WRITE)
" NOWRITE (" __stringify(NO_WRITE) ")"
#endif
@@ -2851,9 +2801,6 @@ static int acornscsi_show_info(struct seq_file *m, struct
Scsi_Host *instance)
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
" TAG"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- " LINK"
-#endif
#if (DEBUG & DEBUG_NO_WRITE)
" NOWRITE (" __stringify(NO_WRITE) ")"
#endif
I'm all for it. Removing never-really-implemented feature on obsolete
hardware is always a good idea.
Acked-by: Hannes Reinecke <h...@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
h...@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
