Hi Saurav + Quinn,
Just curious if this fix needs to be CC'ed to stable as well, or if it's
something that is only triggered with the preceding T10 DIF support
patch in place..?
--nab
On Fri, 2014-04-11 at 16:54 -0400, Saurav Kashyap wrote:
> From: Quinn Tran <quinn.t...@qlogic.com>
>
> Fix double free problem within qla2xxx driver where
> current code prematurely free qla_tgt_cmd while firmware
> still has the command. When firmware release the command
> after abort, the code attempt a second free as part of
> command completion processing.
>
> When TCM start the free process, NULL pointer was hit.
>
> ------
> WARNING: CPU: 8 PID: 43613 at lib/list_debug.c:62 __list_del_entry+0x82/0xd0()
> list_del corruption. next->prev should be ffff88082b5cfb08, but was
> 6b6b6b6b6b6b6b6b
> CPU: 8 PID: 43613 Comm: kworker/8:0 Tainted: GF W O
> 3.13.0-rc3-nab_t10dif+ #6
> Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
> Workqueue: events cache_reap
> 000000000000003e ffff88081b2e3c78 ffffffff815a051f 000000000000003e
> ffff88081b2e3cc8 ffff88081b2e3cb8 ffffffff8104fc2c 0000000000000000
> ffff88082b5cfb00 ffff88081c788d00 ffff88082b5d7200 ffff88082b5d3080
> Call Trace:
> [<ffffffff815a051f>] dump_stack+0x49/0x62
> [<ffffffff8104fc2c>] warn_slowpath_common+0x8c/0xc0
> [<ffffffff8104fd16>] warn_slowpath_fmt+0x46/0x50
> [<ffffffff812b6592>] __list_del_entry+0x82/0xd0
> [<ffffffff8106d48c>] process_one_work+0x12c/0x510
> [<ffffffff8106d4d3>] ? process_one_work+0x173/0x510
> [<ffffffff8106ebdf>] worker_thread+0x11f/0x3a0
> [<ffffffff8106eac0>] ? manage_workers+0x170/0x170
> [<ffffffff81074f26>] kthread+0xf6/0x120
> [<ffffffff8109f103>] ? __lock_release+0x133/0x1b0
> [<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70
> [<ffffffff815aec2c>] ret_from_fork+0x7c/0xb0
> [<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70
> ---[ end trace dfc05c3f7caf8ebe ]---
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> IP: [<ffffffff8106d391>] process_one_work+0x31/0x510
> -------
>
> Signed-off-by: Quinn Tran <quinn.t...@qlogic.com>
> Signed-off-by: Giridhar Malavali <giridhar.malav...@qlogic.com>
> Signed-off-by: Saurav Kashyap <saurav.kash...@qlogic.com>
> ---
> drivers/scsi/qla2xxx/qla_target.c | 29 ++++++++++++++++++++++++++---
> 1 files changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/qla2xxx/qla_target.c
> b/drivers/scsi/qla2xxx/qla_target.c
> index f24d44c..b1d10f9 100644
> --- a/drivers/scsi/qla2xxx/qla_target.c
> +++ b/drivers/scsi/qla2xxx/qla_target.c
> @@ -2681,7 +2681,18 @@ static void qlt_send_term_exchange(struct
> scsi_qla_host *vha,
> rc = __qlt_send_term_exchange(vha, cmd, atio);
> spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
> done:
> - if (rc == 1) {
> + /*
> + * Terminate exchange will tell fw to release any active CTIO
> + * that's in FW posession and cleanup the exchange.
> + *
> + * "cmd->state == QLA_TGT_STATE_ABORTED" means CTIO is still
> + * down at FW. Free the cmd later when CTIO comes back later
> + * w/aborted(0x2) status.
> + *
> + * "cmd->state != QLA_TGT_STATE_ABORTED" means CTIO is already
> + * back w/some err. Free the cmd now.
> + */
> + if ((rc == 1) && (cmd->state != QLA_TGT_STATE_ABORTED)) {
> if (!ha_locked && !in_interrupt())
> msleep(250); /* just in case */
>
> @@ -2689,6 +2700,7 @@ done:
> qlt_unmap_sg(vha, cmd);
> vha->hw->tgt.tgt_ops->free_cmd(cmd);
> }
> + return;
> }
>
> void qlt_free_cmd(struct qla_tgt_cmd *cmd)
> @@ -2906,6 +2918,7 @@ static void qlt_do_ctio_completion(struct scsi_qla_host
> *vha, uint32_t handle,
> case CTIO_LIP_RESET:
> case CTIO_TARGET_RESET:
> case CTIO_ABORTED:
> + /* driver request abort via Terminate exchange */
> case CTIO_TIMEOUT:
> case CTIO_INVALID_RX_ID:
> /* They are OK */
> @@ -2974,9 +2987,18 @@ static void qlt_do_ctio_completion(struct
> scsi_qla_host *vha, uint32_t handle,
> break;
> }
>
> - if (cmd->state != QLA_TGT_STATE_NEED_DATA)
> +
> + /* "cmd->state == QLA_TGT_STATE_ABORTED" means
> + * cmd is already aborted/terminated, we don't
> + * need to terminate again. The exchange is already
> + * cleaned up/freed at FW level. Just cleanup at driver
> + * level.
> + */
> + if ((cmd->state != QLA_TGT_STATE_NEED_DATA) &&
> + (cmd->state != QLA_TGT_STATE_ABORTED)) {
> if (qlt_term_ctio_exchange(vha, ctio, cmd, status))
> return;
> + }
> }
> skip_term:
>
> @@ -3007,7 +3029,8 @@ skip_term:
> "not return a CTIO complete\n", vha->vp_idx, cmd->state);
> }
>
> - if (unlikely(status != CTIO_SUCCESS)) {
> + if (unlikely(status != CTIO_SUCCESS) &&
> + (cmd->state != QLA_TGT_STATE_ABORTED)) {
> ql_dbg(ql_dbg_tgt_mgt, vha, 0xf01f, "Finishing failed CTIO\n");
> dump_stack();
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
