Hi,
> During kexec boot we call ibmvscsi_release_crq_queue() to tear down
> the old CRQ from the previous kernel. ibmvscsi_release_crq_queue()
> does this by calling H_FREE_CRQ. The hypervisor breaks this work
> down so as limit the time spent in any one hcall, so we have to loop
> until complete.
>
> At the moment we delay 0.1 seconds between every H_FREE_CRQ call.
> I see us calling H_FREE_CRQ 60 times on my box which means we
> delayed a total of 6 seconds.
>
> This delay is overkill, we are free to handle all busy return codes
> from the hypervisor as we see fit. Cut the delay down to something
> more reasonable - 1 ms. This improves my boot time by 6 seconds.
>
> Fix the other places we have arbitrary 100 ms delays.
Checking in on this patch, 6 seconds is a decent chunk of our boot time
on KVM.
Anton
> Signed-off-by: Anton Blanchard <an...@samba.org>
> ---
>
> diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c
> b/drivers/scsi/ibmvscsi/ibmvscsi.c index fa76440..ed7b52e 100644
> --- a/drivers/scsi/ibmvscsi/ibmvscsi.c
> +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
> @@ -159,7 +159,7 @@ static void ibmvscsi_release_crq_queue(struct
> crq_queue *queue, tasklet_kill(&hostdata->srp_task);
> do {
> if (rc)
> - msleep(100);
> + msleep(1);
> rc = plpar_hcall_norets(H_FREE_CRQ,
> vdev->unit_address); } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
> dma_unmap_single(hostdata->dev,
> @@ -292,7 +292,7 @@ static int ibmvscsi_reset_crq_queue(struct
> crq_queue *queue, /* Close the CRQ */
> do {
> if (rc)
> - msleep(100);
> + msleep(1);
> rc = plpar_hcall_norets(H_FREE_CRQ,
> vdev->unit_address); } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
>
> @@ -392,7 +392,7 @@ static int ibmvscsi_init_crq_queue(struct
> crq_queue *queue, rc = 0;
> do {
> if (rc)
> - msleep(100);
> + msleep(1);
> rc = plpar_hcall_norets(H_FREE_CRQ,
> vdev->unit_address); } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
> reg_crq_failed:
> @@ -420,7 +420,7 @@ static int ibmvscsi_reenable_crq_queue(struct
> crq_queue *queue, /* Re-enable the CRQ */
> do {
> if (rc)
> - msleep(100);
> + msleep(1);
> rc = plpar_hcall_norets(H_ENABLE_CRQ,
> vdev->unit_address); } while ((rc == H_IN_PROGRESS) || (rc == H_BUSY)
> || (H_IS_LONG_BUSY(rc)));
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
