From: Nicholas Bellinger <n...@linux-iscsi.org>
This patch updates virtscsi_probe() to setup all necessary Scsi_Host
level protection resources necessary to enable DIF on virtio-scsi
<-> vhost-scsi LUNs. Currently hardcoded to 1.
It changes virtscsi_add_cmd() so that outgoing / incoming protection
SGLs are attached after each data payload, and is currently using the
unused virtio_scsi_cmd_req->prio bits to signal the total number of
prot_sgl_count for vhost/scsi to expect.
Cc: Paolo Bonzini <pbonz...@redhat.com>
Cc: Michael S. Tsirkin <m...@redhat.com>
Cc: Martin K. Petersen <martin.peter...@oracle.com>
Cc: Christoph Hellwig <h...@lst.de>
Cc: Hannes Reinecke <h...@suse.de>
Cc: Sagi Grimberg <sa...@dev.mellanox.co.il>
Signed-off-by: Nicholas Bellinger <n...@linux-iscsi.org>
---
drivers/scsi/virtio_scsi.c | 33 ++++++++++++++++++++++++++++-----
1 file changed, 28 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 16bfd50..294466d 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -440,7 +440,7 @@ static int virtscsi_add_cmd(struct virtqueue *vq,
size_t req_size, size_t resp_size, gfp_t gfp)
{
struct scsi_cmnd *sc = cmd->sc;
- struct scatterlist *sgs[4], req, resp;
+ struct scatterlist *sgs[6], req, resp;
struct sg_table *out, *in;
unsigned out_num = 0, in_num = 0;
@@ -458,16 +458,22 @@ static int virtscsi_add_cmd(struct virtqueue *vq,
sgs[out_num++] = &req;
/* Data-out buffer. */
- if (out)
+ if (out) {
sgs[out_num++] = out->sgl;
+ if (scsi_prot_sg_count(sc))
+ sgs[out_num++] = scsi_prot_sglist(sc);
+ }
/* Response header. */
sg_init_one(&resp, &cmd->resp, resp_size);
sgs[out_num + in_num++] = &resp;
/* Data-in buffer */
- if (in)
+ if (in) {
sgs[out_num + in_num++] = in->sgl;
+ if (scsi_prot_sg_count(sc))
+ sgs[out_num + in_num++] = scsi_prot_sglist(sc);
+ }
return virtqueue_add_sgs(vq, sgs, out_num, in_num, cmd, gfp);
}
@@ -498,6 +504,7 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi,
{
struct virtio_scsi_cmd *cmd;
int ret;
+ u8 prio = 0;
struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev);
BUG_ON(scsi_sg_count(sc) > shost->sg_tablesize);
@@ -515,6 +522,10 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi,
memset(cmd, 0, sizeof(*cmd));
cmd->sc = sc;
+
+ if (scsi_prot_sg_count(sc))
+ prio = (u8)scsi_prot_sg_count(sc);
+
cmd->req.cmd = (struct virtio_scsi_cmd_req){
.lun[0] = 1,
.lun[1] = sc->device->id,
@@ -522,7 +533,7 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi,
.lun[3] = sc->device->lun & 0xff,
.tag = (unsigned long)sc,
.task_attr = VIRTIO_SCSI_S_SIMPLE,
- .prio = 0,
+ .prio = prio,
.crn = 0,
};
@@ -871,7 +882,7 @@ static int virtscsi_probe(struct virtio_device *vdev)
{
struct Scsi_Host *shost;
struct virtio_scsi *vscsi;
- int err;
+ int err, host_prot;
u32 sg_elems, num_targets;
u32 cmd_per_lun;
u32 num_queues;
@@ -921,6 +932,17 @@ static int virtscsi_probe(struct virtio_device *vdev)
shost->max_id = num_targets;
shost->max_channel = 0;
shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE;
+
+ /* FIXME: Figure out why this is broken.. */
+ if (1 || virtio_has_feature(vdev, VIRTIO_SCSI_F_T10_PI)) {
+ host_prot = SHOST_DIF_TYPE1_PROTECTION |
SHOST_DIF_TYPE2_PROTECTION |
+ SHOST_DIF_TYPE3_PROTECTION |
SHOST_DIX_TYPE1_PROTECTION |
+ SHOST_DIX_TYPE2_PROTECTION |
SHOST_DIX_TYPE3_PROTECTION;
+
+ scsi_host_set_prot(shost, host_prot);
+ scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+ }
+
err = scsi_add_host(shost, &vdev->dev);
if (err)
goto scsi_add_host_failed;
@@ -990,6 +1012,7 @@ static struct virtio_device_id id_table[] = {
static unsigned int features[] = {
VIRTIO_SCSI_F_HOTPLUG,
VIRTIO_SCSI_F_CHANGE,
+ VIRTIO_SCSI_F_T10_PI,
};
static struct virtio_driver virtio_scsi_driver = {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
