On Wed, Sep 25, 2013 at 7:17 PM, Akinobu Mita <m...@fixstars.com> wrote:
> The data byte count field of PRDT indicates the length of data block
> which is a segment of data transfer for SCSI commands.  The value of
> this field shall have Dword granularity and the the maximum of length
> is 256KB.
>
> This adjusts dma pad mask and max segment size to the above-mentioned
> PRDT limitations.
>
> Signed-off-by: Akinobu Mita <m...@fixstars.com>
> Cc: Subhash Jadavani <subha...@codeaurora.org>
> Cc: Vinayak Holikatti <vinholika...@gmail.com>
> Cc: Santosh Y <santos...@gmail.com>
> Cc: "James E.J. Bottomley" <jbottom...@parallels.com>
> Cc: linux-scsi@vger.kernel.org
> ---
> * Change from v1
> - Add comments for PRDT limitations as suggested by Subhash Jadavani
>
>  drivers/scsi/ufs/ufshcd.c | 15 +++++++++++++++
>  drivers/scsi/ufs/ufshci.h |  5 +++++
>  2 files changed, 20 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index a2abe9a..660792e 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -1918,6 +1918,20 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
>  }
>
>  /**
> + * ufshcd_slave_configure - adjust SCSI device configurations
> + * @sdev: pointer to SCSI device
> + */
> +static int ufshcd_slave_configure(struct scsi_device *sdev)
> +{
> +       struct request_queue *q = sdev->request_queue;
> +
> +       blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
> +       blk_queue_max_segment_size(q, PRDT_DATA_BYTE_COUNT_MAX);
> +
> +       return 0;
> +}
> +
> +/**
>   * ufshcd_slave_destroy - remove SCSI device configurations
>   * @sdev: pointer to SCSI device
>   */
> @@ -2748,6 +2762,7 @@ static struct scsi_host_template ufshcd_driver_template 
> = {
>         .proc_name              = UFSHCD,
>         .queuecommand           = ufshcd_queuecommand,
>         .slave_alloc            = ufshcd_slave_alloc,
> +       .slave_configure        = ufshcd_slave_configure,
>         .slave_destroy          = ufshcd_slave_destroy,
>         .eh_abort_handler       = ufshcd_abort,
>         .eh_device_reset_handler = ufshcd_device_reset,
> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
> index 0475c66..b2b7004 100644
> --- a/drivers/scsi/ufs/ufshci.h
> +++ b/drivers/scsi/ufs/ufshci.h
> @@ -296,6 +296,11 @@ enum {
>         MASK_OCS                        = 0x0F,
>  };
>
> +/* The maximum length of the data byte count field in the PRDT is 256KB */
> +#define PRDT_DATA_BYTE_COUNT_MAX       (256 * 1024)
> +/* The granularity of the data byte count field in the PRDT is 32-bit */
> +#define PRDT_DATA_BYTE_COUNT_PAD       4
> +
>  /**
>   * struct ufshcd_sg_entry - UFSHCI PRD Entry
>   * @base_addr: Lower 32bit physical address DW-0

Acked-by: Vinayak Holikatti <vinholika...@gmail.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to