snip > */ > payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | > LINKMODE_AUTO | LINKRATE_15 | > - LINKRATE_30 | LINKRATE_60 | phy_id); > + LINKRATE_30 | LINKRATE_60 | LINKRATE_120 | phy_id); Is it safe to set 12g linkrate support also on 6g, if so, then :
Reviewed-by: Jack Wang <jinpu.w...@profitbricks.com> > /* SSC Disable and SAS Analog ST configuration */ > /** > payload.ase_sh_lm_slr_phyid = > diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h > b/drivers/scsi/pm8001/pm80xx_hwi.h > index 2b760ba..9a9116d 100644 > --- a/drivers/scsi/pm8001/pm80xx_hwi.h > +++ b/drivers/scsi/pm8001/pm80xx_hwi.h > @@ -168,6 +168,7 @@ > #define LINKRATE_15 (0x01 << 8) > #define LINKRATE_30 (0x02 << 8) > #define LINKRATE_60 (0x06 << 8) > +#define LINKRATE_120 (0x08 << 8) > > /* Thermal related */ > #define THERMAL_ENABLE 0x1 > @@ -1223,10 +1224,10 @@ typedef struct SASProtocolTimerConfig > SASProtocolTimerConfig_t; > > /* MSGU CONFIGURATION TABLE*/ > > -#define SPCv_MSGU_CFG_TABLE_UPDATE 0x01 > -#define SPCv_MSGU_CFG_TABLE_RESET 0x02 > -#define SPCv_MSGU_CFG_TABLE_FREEZE 0x04 > -#define SPCv_MSGU_CFG_TABLE_UNFREEZE 0x08 > +#define SPCv_MSGU_CFG_TABLE_UPDATE 0x001 > +#define SPCv_MSGU_CFG_TABLE_RESET 0x002 > +#define SPCv_MSGU_CFG_TABLE_FREEZE 0x004 > +#define SPCv_MSGU_CFG_TABLE_UNFREEZE 0x008 > #define MSGU_IBDB_SET 0x00 > #define MSGU_HOST_INT_STATUS 0x08 > #define MSGU_HOST_INT_MASK 0x0C > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
