>From d6b5e5d88f424b334c9b9c241f988b9eec1a70c7 Mon Sep 17 00:00:00 2001
From: Anand Kumar Santhanam <anandkumar.santha...@pmcs.com>
Date: Tue, 17 Sep 2013 14:32:20 +0530
Subject: [PATCH V2 02/10] pm80xx: IButton feature support for motherboard
controllers.
IButton security feature support for motherboard controllers.
Signed-off-by: anandkumar.santha...@pmcs.com
---
drivers/scsi/pm8001/pm80xx_hwi.c | 22 +++++++++++++++++++++-
1 files changed, 21 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 8efac42..912dfec 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -967,6 +967,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
{
u32 regval;
u32 bootloader_state;
+ u32 ibutton0, ibutton1;
/* Check if MPI is in ready state to reset */
if (mpi_uninit_check(pm8001_ha) != 0) {
@@ -1025,7 +1026,26 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
if (-1 == check_fw_ready(pm8001_ha)) {
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Firmware is not ready!\n"));
- return -EBUSY;
+ /* check iButton feature support for motherboard controller */
+ if (pm8001_ha->pdev->subsystem_vendor !=
+ PCI_VENDOR_ID_ADAPTEC2) {
+ ibutton0 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_HOST_SCRATCH_PAD_6);
+ ibutton1 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_HOST_SCRATCH_PAD_7);
+ if (!ibutton0 && !ibutton1) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("iButton Feature is"
+ " not Available!!!\n"));
+ return -EBUSY;
+ }
+ if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("CRC Check for iButton"
+ " Feature Failed!!!\n"));
+ return -EBUSY;
+ }
+ }
}
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("SPCv soft reset Complete\n"));
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
