On Tue, Sep 03, 2013 at 03:35:09PM +0800, Yijing Wang wrote:
> Pcie_capability_xxx() interfaces were introudced to
> simplify code to access PCIe Cap config space. And
> because PCI core saves the PCIe Cap offset in
> set_pcie_port_type() when device is enumerated.
> So we can use pci_is_pcie() instead.
>
> Signed-off-by: Yijing Wang <wangyij...@huawei.com>
> Cc: Jiang Liu <jiang....@huawei.com>
> Cc: Anil Gurumurthy <aguru...@brocade.com>
> Cc: Vijaya Mohan Guvva <vmo...@brocade.com>
> Cc: "James E.J. Bottomley" <jbottom...@parallels.com>
> Cc: linux-scsi@vger.kernel.org
> Cc: linux-ker...@vger.kernel.org
> ---
> drivers/scsi/bfa/bfad.c | 9 +++------
> 1 files changed, 3 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
> index 9611195..d726b81 100644
> --- a/drivers/scsi/bfa/bfad.c
> +++ b/drivers/scsi/bfa/bfad.c
> @@ -767,7 +767,6 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
>
> /* Adjust PCIe Maximum Read Request Size */
> if (pcie_max_read_reqsz > 0) {
> - int pcie_cap_reg;
> u16 pcie_dev_ctl;
> u16 mask = 0xffff;
>
> @@ -794,10 +793,8 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
> break;
> }
>
> - pcie_cap_reg = pci_find_capability(pdev, PCI_CAP_ID_EXP);
> - if (mask != 0xffff && pcie_cap_reg) {
> - pcie_cap_reg += 0x08;
> - pci_read_config_word(pdev, pcie_cap_reg, &pcie_dev_ctl);
> + if (mask != 0xffff && pci_is_pcie(pdev)) {
Please move the pci_is_pcie() test up to the
"if (pcie_mas_read_reqsz ..." statement. There's no point in doing
the switch statement if this isn't a PCIe device.
> + pcie_capability_read_word(pdev, PCI_EXP_DEVCTL,
> &pcie_dev_ctl);
> if ((pcie_dev_ctl & 0x7000) != mask) {
> printk(KERN_WARNING "BFA[%s]: "
> "pcie_max_read_request_size is %d, "
> @@ -806,7 +803,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
> pcie_max_read_reqsz);
>
> pcie_dev_ctl &= ~0x7000;
> - pci_write_config_word(pdev, pcie_cap_reg,
> + pcie_capability_write_word(pdev, PCI_EXP_DEVCTL,
> pcie_dev_ctl | mask);
Please rework this to use pcie_set_readrq() instead of writing
the capability directly. If we write the capability directly, we
risk writing a value that is incompatible with the MPS
configuration done by the PCI core.
> }
> }
> --
> 1.7.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
