The IO command size is 128 bytes for these new controllers as opposed to 64
for the old 8001 controller.
The Adaptec out-of-tree driver did this correctly. After comparing the two
this turned out to be the crucial difference.
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
Acked-by: anandkumar.santha...@pmcs.com
Cc: sta...@vger.kernel.org # for v3.10 and up
---
drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 302514d..e1db5ca 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -275,7 +275,7 @@ static void init_default_table_values(struct
pm8001_hba_info *pm8001_ha)
for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
- PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30);
+ PM8001_MPI_QUEUE | (128 << 16) | (0x00<<30);
pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
@@ -301,7 +301,7 @@ static void init_default_table_values(struct
pm8001_hba_info *pm8001_ha)
}
for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
- PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30);
+ PM8001_MPI_QUEUE | (128 << 16) | (0x01<<30);
pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
