ARM cannot handle udelay for more than 2 miliseconds, so we
should use mdelay instead for those.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
Cc: GOTO Masanori <go...@debian.or.jp>
Cc: YOKOTA Hiroshi <yok...@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jbottom...@parallels.com>
Cc: linux-scsi@vger.kernel.org
---
drivers/scsi/nsp32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 1e3879d..0665f9c 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
* reset SCSI bus
*/
nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
- udelay(RESET_HOLD_TIME);
+ mdelay(RESET_HOLD_TIME / 1000);
nsp32_write1(base, SCSI_BUS_CONTROL, 0);
for(i = 0; i < 5; i++) {
intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
