Signed-off-by: Rob Evers <[email protected]>
---
drivers/scsi/scsi_scan.c | 109 +++++++++++++++++++++++++----------------------
1 file changed, 59 insertions(+), 50 deletions(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 3e58b22..b2abf22 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1282,6 +1282,64 @@ void int_to_scsilun(unsigned int lun, struct scsi_lun
*scsilun)
}
EXPORT_SYMBOL(int_to_scsilun);
+int scsi_do_report_luns(struct scsi_device *sdev, int length,
+ struct scsi_lun *lun_data, char *devname)
+{
+ unsigned int retries;
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+ struct scsi_sense_hdr sshdr;
+ int result;
+
+ scsi_cmd[0] = REPORT_LUNS;
+
+ /*
+ * bytes 1 - 5: reserved, set to zero.
+ */
+ memset(&scsi_cmd[1], 0, 5);
+
+ /*
+ * bytes 6 - 9: length of the command.
+ */
+ scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff;
+ scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff;
+ scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff;
+ scsi_cmd[9] = (unsigned char) length & 0xff;
+
+ scsi_cmd[10] = 0; /* reserved */
+ scsi_cmd[11] = 0; /* control */
+
+ /*
+ * We can get a UNIT ATTENTION, for example a power on/reset, so
+ * retry a few times (like sd.c does for TEST UNIT READY).
+ * Experience shows some combinations of adapter/devices get at
+ * least two power on/resets.
+ *
+ * Illegal requests (for devices that do not support REPORT LUNS)
+ * should come through as a check condition, and will not generate
+ * a retry.
+ */
+ for (retries = 0; retries < 3; retries++) {
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sending"
+ " REPORT LUNS to %s (try %d)\n", devname,
+ retries));
+ result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
+ lun_data, length, &sshdr,
+ SCSI_TIMEOUT + 4 * HZ, 3, NULL);
+
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: REPORT LUNS"
+ " %s (try %d) result 0x%x\n", result
+ ? "failed" : "successful", retries, result));
+ if (result == 0)
+ break;
+ else if (scsi_sense_valid(&sshdr)) {
+ if (sshdr.sense_key != UNIT_ATTENTION)
+ break;
+ }
+ }
+
+ return result;
+}
+
/**
* scsi_report_lun_scan - Scan using SCSI REPORT LUN results
* @starget: which target
@@ -1306,15 +1364,12 @@ static int scsi_report_lun_scan(struct scsi_target
*starget, int bflags,
int rescan)
{
char devname[64];
- unsigned char scsi_cmd[MAX_COMMAND_SIZE];
unsigned int length;
unsigned int lun;
unsigned int num_luns;
- unsigned int retries;
int result;
struct scsi_lun *lunp, *lun_data;
u8 *data;
- struct scsi_sense_hdr sshdr;
struct scsi_device *sdev;
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
int ret = 0;
@@ -1369,53 +1424,7 @@ static int scsi_report_lun_scan(struct scsi_target
*starget, int bflags,
goto out;
}
- scsi_cmd[0] = REPORT_LUNS;
-
- /*
- * bytes 1 - 5: reserved, set to zero.
- */
- memset(&scsi_cmd[1], 0, 5);
-
- /*
- * bytes 6 - 9: length of the command.
- */
- scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff;
- scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff;
- scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff;
- scsi_cmd[9] = (unsigned char) length & 0xff;
-
- scsi_cmd[10] = 0; /* reserved */
- scsi_cmd[11] = 0; /* control */
-
- /*
- * We can get a UNIT ATTENTION, for example a power on/reset, so
- * retry a few times (like sd.c does for TEST UNIT READY).
- * Experience shows some combinations of adapter/devices get at
- * least two power on/resets.
- *
- * Illegal requests (for devices that do not support REPORT LUNS)
- * should come through as a check condition, and will not generate
- * a retry.
- */
- for (retries = 0; retries < 3; retries++) {
- SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending"
- " REPORT LUNS to %s (try %d)\n", devname,
- retries));
-
- result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
- lun_data, length, &sshdr,
- SCSI_TIMEOUT + 4 * HZ, 3, NULL);
-
- SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
- " %s (try %d) result 0x%x\n", result
- ? "failed" : "successful", retries, result));
- if (result == 0)
- break;
- else if (scsi_sense_valid(&sshdr)) {
- if (sshdr.sense_key != UNIT_ATTENTION)
- break;
- }
- }
+ result = scsi_do_report_luns(sdev, length, lun_data, devname);
if (result) {
/*
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
