Added a new config CONFIG_SATA_ZPODD, which is used to support
SATA based zero power ODD(ZPODD), and depends on ATA_ACPI.
Signed-off-by: Aaron Lu <aaron...@intel.com>
---
drivers/ata/Kconfig | 13 +++++++++++++
drivers/ata/Makefile | 1 +
2 files changed, 14 insertions(+)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e08d322..996d16c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -58,6 +58,19 @@ config ATA_ACPI
You can disable this at kernel boot time by using the
option libata.noacpi=1
+config SATA_ZPODD
+ bool "SATA Zero Power ODD Support"
+ depends on ATA_ACPI
+ default n
+ help
+ This option adds support for SATA ZPODD. It requires both
+ ODD and the platform support, and if enabled, will automatically
+ power on/off the ODD when certain condition is satisfied. This
+ does not impact user's experience of the ODD, only power is saved
+ when ODD is not in use(i.e. no disc inside).
+
+ If unsure, say N.
+
config SATA_PMP
bool "SATA Port Multiplier support"
default y
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 9329daf..85e3de4 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -107,3 +107,4 @@ libata-y := libata-core.o libata-scsi.o libata-eh.o
libata-transport.o
libata-$(CONFIG_ATA_SFF) += libata-sff.o
libata-$(CONFIG_SATA_PMP) += libata-pmp.o
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
+libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
