A SCSI LLD may start cleaning up host resources as soon as
scsi_remove_host() returns. These host resources may be needed by
the LLD in an implementation of one of the eh_* functions. So if
one of the eh_* functions is in progress when scsi_remove_host()
is invoked, wait until the eh_* function has finished. Also, do
not invoke any of the eh_* functions after scsi_remove_host() has
started.
Signed-off-by: Bart Van Assche <bvanass...@acm.org>
Cc: Hannes Reinecke <h...@suse.de>
Cc: Mike Christie <micha...@cs.wisc.edu>
Cc: Tejun Heo <t...@kernel.org>
---
drivers/scsi/hosts.c | 2 +-
drivers/scsi/scsi_error.c | 76 +++++++++++++++++++++++++++++++++++++++++++--
include/scsi/scsi_host.h | 1 +
3 files changed, 76 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index b68a013..a941861 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -155,7 +155,7 @@ static bool scsi_remove_host_done(struct Scsi_Host *shost)
{
lockdep_assert_held(shost->host_lock);
- return list_empty(&shost->__devices);
+ return list_empty(&shost->__devices) && !shost->eh_active;
}
/* Test whether scsi_remove_host() may finish, and if so, wake it up. */
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index c1b05a8..76761aa 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -536,8 +536,59 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
}
/**
+ * scsi_begin_eh - start host-related error handling
+ *
+ * Must be called before invoking any of the scsi_host_template.eh_* functions
+ * to avoid that scsi_remove_host() returns while one of these callback
+ * functions is in progress.
+ *
+ * Returns 0 if invoking an eh_* function is allowed and a negative value if
+ * not. If this function returns 0 then scsi_end_eh() must be called
+ * eventually.
+ *
+ * Note: scsi_send_eh_cmnd() calls do not have to be protected by a
+ * scsi_begin_eh() / scsi_end_eh() pair since these operate on an unfinished
+ * block layer request. Since scsi_remove_host() waits until all SCSI devices
+ * have been removed and since blk_cleanup_queue() is invoked during SCSI
+ * device removal scsi_remove_host() won't finish while a scsi_send_eh_cmnd()
+ * call is in progress.
+ */
+static int scsi_begin_eh(struct Scsi_Host *host)
+{
+ int res;
+
+ spin_lock_irq(host->host_lock);
+ switch (host->shost_state) {
+ case SHOST_DEL:
+ case SHOST_DEL_RECOVERY:
+ res = -ENODEV;
+ break;
+ default:
+ WARN_ON_ONCE(host->eh_active < 0 || host->eh_active > 1);
+ host->eh_active++;
+ res = 0;
+ break;
+ }
+ spin_unlock_irq(host->host_lock);
+
+ return res;
+}
+
+/**
+ * scsi_end_eh - finish host-related error handling
+ */
+static void scsi_end_eh(struct Scsi_Host *host)
+{
+ spin_lock_irq(host->host_lock);
+ host->eh_active--;
+ WARN_ON_ONCE(host->eh_active < 0 || host->eh_active > 1);
+ scsi_check_remove_host_done(host);
+ spin_unlock_irq(host->host_lock);
+}
+
+/**
* scsi_try_host_reset - ask host adapter to reset itself
- * @scmd: SCSI cmd to send hsot reset.
+ * @scmd: SCSI cmd to send host reset.
*/
static int scsi_try_host_reset(struct scsi_cmnd *scmd)
{
@@ -552,6 +603,9 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
if (!hostt->eh_host_reset_handler)
return FAILED;
+ if (scsi_begin_eh(host))
+ return FAST_IO_FAIL;
+
rtn = hostt->eh_host_reset_handler(scmd);
if (rtn == SUCCESS) {
@@ -561,6 +615,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
scsi_report_bus_reset(host, scmd_channel(scmd));
spin_unlock_irqrestore(host->host_lock, flags);
}
+ scsi_end_eh(host);
return rtn;
}
@@ -582,6 +637,9 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
if (!hostt->eh_bus_reset_handler)
return FAILED;
+ if (scsi_begin_eh(host))
+ return FAST_IO_FAIL;
+
rtn = hostt->eh_bus_reset_handler(scmd);
if (rtn == SUCCESS) {
@@ -591,6 +649,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
scsi_report_bus_reset(host, scmd_channel(scmd));
spin_unlock_irqrestore(host->host_lock, flags);
}
+ scsi_end_eh(host);
return rtn;
}
@@ -621,6 +680,9 @@ static int scsi_try_target_reset(struct scsi_cmnd *scmd)
if (!hostt->eh_target_reset_handler)
return FAILED;
+ if (scsi_begin_eh(host))
+ return FAST_IO_FAIL;
+
rtn = hostt->eh_target_reset_handler(scmd);
if (rtn == SUCCESS) {
spin_lock_irqsave(host->host_lock, flags);
@@ -628,6 +690,7 @@ static int scsi_try_target_reset(struct scsi_cmnd *scmd)
__scsi_report_device_reset);
spin_unlock_irqrestore(host->host_lock, flags);
}
+ scsi_end_eh(host);
return rtn;
}
@@ -645,14 +708,20 @@ static int scsi_try_target_reset(struct scsi_cmnd *scmd)
static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
{
int rtn;
- struct scsi_host_template *hostt = scmd->device->host->hostt;
+ struct Scsi_Host *host = scmd->device->host;
+ struct scsi_host_template *hostt = host->hostt;
if (!hostt->eh_device_reset_handler)
return FAILED;
+ if (scsi_begin_eh(host))
+ return FAST_IO_FAIL;
+
rtn = hostt->eh_device_reset_handler(scmd);
if (rtn == SUCCESS)
__scsi_report_device_reset(scmd->device, NULL);
+ scsi_end_eh(host);
+
return rtn;
}
@@ -1877,6 +1946,9 @@ int scsi_error_handler(void *data)
}
__set_current_state(TASK_RUNNING);
+ WARN_ONCE(shost->eh_active, "scsi_eh_%d: eh_active = %d\n",
+ shost->host_no, shost->eh_active);
+
SCSI_LOG_ERROR_RECOVERY(1,
printk("Error handler scsi_eh_%d exiting\n", shost->host_no));
shost->ehandler = NULL;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 1b7fd89..5e2fcd2 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -576,6 +576,7 @@ struct Scsi_Host {
struct task_struct * ehandler; /* Error recovery thread. */
struct completion * eh_action; /* Wait for specific actions on the
host. */
+ int eh_active;
wait_queue_head_t host_wait;
wait_queue_head_t remove_host;
struct scsi_host_template *hostt;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
