Am Dienstag 21 August 2012, 21:53:15 schrieb sreekanth.re...@lsi.com:
> Fix for issue - Unable to boot from the SAS drive connected to HBA
>
> This patch checks whether HBA is SAS2008 B0 controller.
> if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of
> MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts.
>
> Signed-off-by: Sreekanth Reddy <sreekanth.re...@lsi.com>
> Cc: <sta...@kernel.org>
> ---
>
> diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c
> b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6102ef2..fd2f4ad 100644
> --- a/drivers/scsi/mpt2sas/mpt2sas_base.c
> +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
> @@ -1207,6 +1207,15 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
> {
> int base;
> u16 message_control;
> + u8 revision;
> +
> + /* Check whether controller SAS2008 B0 controller,
> + if it is a SAS2008 B0 controller use IO-APIC instead of MSIX */
> + pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
Nope. Just use ioc->pdev->revision here.
> + if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
> + revision == 0x01) {
> + return -EINVAL;
> + }
>
>
> base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
Eike
signature.asc
Description: This is a digitally signed message part.
