Hannes Reinecke wrote:
David Milburn wrote:
Hannes,
Does ahc_done need to check the SCB_ACTIVE flag only if the SCB
is not in the untagged queue before panic?
If the driver is in error recovery, you may end panic'ing
on a TUR that is in the untagged queue.
Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
SCB 3 done'd twice
This patch is included in Adaptec's 6.3.11 driver on their
website.
Thank you,
David
--- scsi-misc-2.6.git/drivers/scsi/aic7xxx/aic7xxx_osm.c.abort
+++ scsi-misc-2.6.git/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -1658,9 +1658,12 @@ ahc_done(struct ahc_softc *ahc, struct s
untagged_q = &(ahc->untagged_queues[target_offset]);
TAILQ_REMOVE(untagged_q, scb, links.tqe);
BUG_ON(!TAILQ_EMPTY(untagged_q));
- }
-
- if ((scb->flags & SCB_ACTIVE) == 0) {
+ } else if ((scb->flags & SCB_ACTIVE) == 0) {
+ /*
+ * Transactions aborted from the untagged queue may
+ * not have been dispatched to the controller, so
+ * only check the SCB_ACTIVE flag for tagged transactions.
+ */
printf("SCB %d done'd twice\n", scb->hscb->tag);
ahc_dump_card_state(ahc);
panic("Stopping for safety");
Yes, this looks correct. The SCB_ACTIVE flag is reset when doing an
ahc_scb_free()
at the very end of ahc_done(). And seeing that we are re-using scbs for error
recovery
we might indeed end up with an scb with SCB_ACTIVE is set.
But I'll do some more investigation.
Do you have any setup to exercise this?
Hannes,
I don't have a hands on setup, but, I verified the fix
by providing a rhel4 test kernel to prevent the panic
above.
James committed to scsi-misc-2.6.git
cddb3e38076639aacf2182e4b164e45ee8bbe6d8
Thanks,
David
Cheers,
Hannes
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
