Hopefully this should resolve the outstanding initio failures.
Patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
Full patch attached.
James
---
From: Stuart Swales <[EMAIL PROTECTED]>
Date: Wed, 23 Jan 2008 20:00:48 +0000
Subject: [SCSI] initio: fix module hangs on loading
I've verified (on my Initio 9100 with a DAT drive) that the
2.6.24-rc8-git6 initio module still hangs on loading.
These fixes (other than the printk) are needed to get the module to load
ok (and work correctly) with my adapter & tape drive.
a) printk cosmetic fix
b) cblk->sglen needs setting for later DMA I/O routines to use
c) host->bios_addr needs setting for debug output correctness
d) semaph & semaph_lock initialisation had got lost since 2.6.22
e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20
when shifted left)
Signed-off-by: James Bottomley <[EMAIL PROTECTED]>
---
drivers/scsi/initio.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 01bf018..a10a5c7 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -823,7 +823,7 @@ static void initio_append_busy_scb(struct initio_host *
host, struct scsi_ctrl_b
{
#if DEBUG_QUEUE
- printk("append busy SCB %o; ", scbp);
+ printk("append busy SCB %p; ", scbp);
#endif
if (scbp->tagmsg)
host->act_tags[scbp->target]++;
@@ -2609,6 +2609,7 @@ static void initio_build_scb(struct initio_host * host,
struct scsi_ctrl_blk * c
cblk->bufptr = cpu_to_le32((u32)dma_addr);
cmnd->SCp.dma_handle = dma_addr;
+ cblk->sglen = nseg;
cblk->flags |= SCF_SG; /* Turn on SG list flag */
total_len = 0;
@@ -2869,6 +2870,7 @@ static int initio_probe_one(struct pci_dev *pdev,
host = (struct initio_host *)shost->hostdata;
memset(host, 0, sizeof(struct initio_host));
host->addr = pci_resource_start(pdev, 0);
+ host->bios_addr = bios_seg;
if (!request_region(host->addr, 256, "i91u")) {
printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n",
host->addr);
@@ -2895,6 +2897,8 @@ static int initio_probe_one(struct pci_dev *pdev,
host->pci_dev = pdev;
+ host->semaph = 1;
+ spin_lock_init(&host->semaph_lock);
host->num_scbs = num_scb;
host->scb = scb;
host->next_pending = scb;
@@ -2911,7 +2915,7 @@ static int initio_probe_one(struct pci_dev *pdev,
host->last_avail = prev;
spin_lock_init(&host->avail_lock);
- initio_init(host, phys_to_virt(bios_seg << 4));
+ initio_init(host, phys_to_virt(((u32)bios_seg << 4)));
host->jsstatus0 = 0;
--
1.5.3.7
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
