On Tue, 15 Jan 2008 06:30:11 -0800 (PST) [EMAIL PROTECTED] wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=9752 > > Summary: getting "FAULT code" message at startup in mpt fusion > scsi driver > Product: SCSI Drivers > Version: 2.5 > KernelVersion: 2.6.14 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: Other > AssignedTo: [EMAIL PROTECTED] > ReportedBy: [EMAIL PROTECTED] > > > Hardware Environment: 32-bit x86, dual Xeon > Software Environment: nothing special > Problem Description: > > On blade startup we're seeing the following message: > > Fusion MPT base driver 3.02.55 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SAS Host driver 3.02.55 > mptbase: Initiating ioc0 bringup > mptbase: ioc0: WARNING - IOC is in FAULT state!!! > FAULT code = 1804h > mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=0 > mptbase: ioc0 NOT READY WARNING! > mptbase: WARNING - ioc0 did not initialize properly! (-1) > mptsas: probe of 0000:05:01.0 failed with error -1 > > > I'm not very knowledgable with SCSI, so can someone tell me whether this is a > disk fault or a host fault? Even better, does anyone know what the specific > fault code means or where I could look it up? > > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug, or are watching someone who is. - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
