On Thu, 29 Nov 2007 14:03:19 +0100
Jan Kara <[EMAIL PROTECTED]> wrote:
> Adding relevant people and lists to CC...
>
> Honza
>
> ----- Forwarded message from Anders Henke <[EMAIL PROTECTED]> -----
>
> Date: Thu, 29 Nov 2007 13:31:50 +0100
> From: Anders Henke <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: broken dpt_i2o in 2.6.23 (was: ext2_check_page: bad entry in
> directory)
> User-Agent: Mutt/1.5.13 (2006-08-11)
>
> On November 28 2007, Anders Henke wrote:
> > As "everything is reported as being zero" is quite odd an Jan took a
> > guess that it might be block-layer or driver-related, I've assumed
> > that the driver is responsible for this; just out of the curiousity,
> > I've manually replaced the dpt_i2o driver by the 2.6.19 one by copying
> > driver/scsi/dpt_i2o.c driver/scsi/dpti.h and driver/scsi/dpt/ into a
> > vanilla 2.6.23.1. kernel; using this kernel fixed the issue for me.
> >
> > I haven't yet fine-tested from which kernel release on the dpt_i2o driver
> > behaves like this and spews out zeroed blocks when trying to mount
> > the rootfs. Maybe this is just some timing issue.
>
> I've started the fine-tests and can say so far that dpt_i2o from
> 2.6.22 is still fine. Test is simple:
>
> [EMAIL PROTECTED]:/usr/src/linux-2.6.22/drivers/scsi/dpt$ cp -r dpt/
> dpt_i2o.c dpti.h /usr/src/linux-2.6.23.1/drivers/scsi/
>
> ... recompile the kernel, reboot: works.
>
> 2.6.22 and 2.6.23 differ in terms of the dpt_i2o driver by two different
> patch sets:
> -one 2 Kb small set of patches from 2.6.22 to 2.6.22-rc1
> -one 7 Kb set of patches from 2.6.23-rc2 to 2.6.23-rc3
> -one 162 Kb set of patches from 2.6.23-rc9 to 2.6.23-rc10.
>
> When applying the 2.6.23-rc1-based driver to "my" 2.6.31.1 kernel,
> the "zero blocks"-symptom show up, so it's the "lucky" situation
> that the smallest patch actually seams to be the broken one.
>
> According to the 2.6.23-rc1 short-form changelog, there is
> one major edit on the dpt_i2o driver:
>
> FUJITA Tomonori
>
> [SCSI] dpt_i2o: convert to use the data buffer accessors
>
> Stephen Rothwell
> dpt_i2o depends on virt_to_bus
>
> Fujita, would you please take a look at this?
Sorry about the bug. Can you try this?
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 8258506..1255b26 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -3295,7 +3295,7 @@ static struct scsi_host_template adpt_template = {
.this_id = 7,
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
- .use_sg_chaining = ENABLE_SG_CHAINING,
+ .use_sg_chaining = DISABLE_SG_CHAINING,
};
static s32 adpt_scsi_register(adpt_hba* pHba)
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
