- This patch depends on:
usb: transport.c use scsi_eh API in REQUEST_SENSE execution
- Use scsi data accessors and remove of !use_sg code path.
- New usb_stor_bulk_srb() for use by drivers
Signed-off-by: Boaz Harrosh <[EMAIL PROTECTED]>
---
drivers/usb/storage/transport.c | 44 +++++++++++++++++++++++---------------
drivers/usb/storage/transport.h | 2 +
2 files changed, 29 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index c646750..d3a84a2 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -459,6 +459,21 @@ static int usb_stor_bulk_transfer_sglist(struct us_data
*us, unsigned int pipe,
}
/*
+ * Common used function. Transfer a complete command
+ * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid
+ */
+int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+ struct scsi_cmnd* srb)
+{
+ int resid = scsi_get_resid(srb);
+ int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
+ scsi_sg_count(srb), scsi_bufflen(srb),
+ &resid);
+ scsi_set_resid(srb, resid);
+ return result;
+}
+
+/*
* Transfer an entire SCSI command's worth of data payload over the bulk
* pipe.
*
@@ -508,7 +523,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb,
struct us_data *us)
int result;
/* send the command to the transport layer */
- srb->resid = 0;
+ scsi_set_resid(srb, 0);
result = us->transport(srb, us);
/* if the command gets aborted by the higher layers, we need to
@@ -568,7 +583,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb,
struct us_data *us)
* A short transfer on a command where we don't expect it
* is unusual, but it doesn't mean we need to auto-sense.
*/
- if ((srb->resid > 0) &&
+ if ((scsi_get_resid(srb) > 0) &&
!((srb->cmnd[0] == REQUEST_SENSE) ||
(srb->cmnd[0] == INQUIRY) ||
(srb->cmnd[0] == MODE_SENSE) ||
@@ -593,7 +608,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb,
struct us_data *us)
srb->cmd_len = 12;
/* issue the auto-sense command */
- srb->resid = 0;
+ scsi_set_resid(srb, 0);
temp_result = us->transport(us->srb, us);
/* let's clean up right away */
@@ -649,7 +664,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb,
struct us_data *us)
/* Did we transfer less than the minimum amount required? */
if (srb->result == SAM_STAT_GOOD &&
- srb->request_bufflen - srb->resid < srb->underflow)
+ scsi_bufflen(srb) - scsi_get_resid(srb) <
srb->underflow)
srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24);
return;
@@ -708,7 +723,7 @@ void usb_stor_stop_transport(struct us_data *us)
int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
{
- unsigned int transfer_length = srb->request_bufflen;
+ unsigned int transfer_length = scsi_bufflen(srb);
unsigned int pipe = 0;
int result;
@@ -737,9 +752,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct
us_data *us)
if (transfer_length) {
pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_transfer_sg(us, pipe,
- srb->request_buffer, transfer_length,
- srb->use_sg, &srb->resid);
+ result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("CBI data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
@@ -808,7 +821,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct
us_data *us)
*/
int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
{
- unsigned int transfer_length = srb->request_bufflen;
+ unsigned int transfer_length = scsi_bufflen(srb);
int result;
/* COMMAND STAGE */
@@ -836,9 +849,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct
us_data *us)
if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_transfer_sg(us, pipe,
- srb->request_buffer, transfer_length,
- srb->use_sg, &srb->resid);
+ result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("CB data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
@@ -904,7 +915,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct
us_data *us)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
- unsigned int transfer_length = srb->request_bufflen;
+ unsigned int transfer_length = scsi_bufflen(srb);
unsigned int residue;
int result;
int fake_sense = 0;
@@ -955,9 +966,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct
us_data *us)
if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_transfer_sg(us, pipe,
- srb->request_buffer, transfer_length,
- srb->use_sg, &srb->resid);
+ result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("Bulk data transfer result 0x%x\n", result);
if (result == USB_STOR_XFER_ERROR)
return USB_STOR_TRANSPORT_ERROR;
@@ -1036,7 +1045,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct
us_data *us)
if (residue) {
if (!(us->flags & US_FL_IGNORE_RESIDUE)) {
residue = min(residue, transfer_length);
- srb->resid = max(srb->resid, (int) residue);
+ scsi_set_resid(srb, max(scsi_get_resid(srb),
+ (int) residue));
}
}
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 633a715..ada7c2f 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -139,6 +139,8 @@ extern int usb_stor_bulk_transfer_buf(struct us_data *us,
unsigned int pipe,
void *buf, unsigned int length, unsigned int *act_len);
extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, int use_sg, int *residual);
+extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+ struct scsi_cmnd* srb);
extern int usb_stor_port_reset(struct us_data *us);
#endif
--
1.5.3.1
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
