I just received the retail version of an Adaptec 58300 PCI-X SAS adapter
with PCI ID 9005:0416.
Here's the lspci -vvn output:
03:08.0 Class 0107: 9005:0416 (rev 09)
Subsystem: 9005:0416
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (32000ns min, 26750ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=256K]
Region 2: Memory at fe500000 (64-bit, prefetchable) [size=128K]
Region 4: I/O ports at bc00 [size=256]
Expansion ROM at fe600000 [disabled] [size=512K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=3 OST=4
Status: Bus=255 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-,
DC=simple, DMMRBC=3, DMOST=4, DMCRS=4, RSCEM-
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e0] Message Signalled Interrupts: 64bit+ Queue=0/2
Enable-
Address: 0000000000000000 Data: 0000
The aic94xx driver in kernel 2.6.21.1 does not recognize the card.
With following patch it does:
--- linux-2.6.21.1.orig/drivers/scsi/aic94xx/aic94xx_hwi.h 2007-05-10
18:29:38.000000000 +0200
+++ linux-2.6.21.1/drivers/scsi/aic94xx/aic94xx_hwi.h 2007-05-03
22:42:35.000000000 +0200
@@ -45,6 +45,7 @@
*/
#define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410
#define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR16 0x416
#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E
#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1F 0x41F
#define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430
--- linux-2.6.21.1.orig/drivers/scsi/aic94xx/aic94xx_init.c 2007-05-10
18:30:14.000000000 +0200
+++ linux-2.6.21.1/drivers/scsi/aic94xx/aic94xx_init.c 2007-05-03
22:43:29.000000000 +0200
@@ -837,6 +837,8 @@
0, 0, 1},
{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR12),
0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR16),
+ 0, 0, 1},
{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1E),
0, 0, 1},
{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1F),
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
