Use a newly added PCI API to issue a PCI Fundamental reset
(warm reset) to a new ipr PCI-E adapter. Typically, the
ipr adapter uses the start BIST bit in config space to reset
an adapter. Issuing start BIST on this particular adapter
results in the PCI-E logic on the card losing sync, which
causes PCI-E errors, making the card unusable. The only reset
mechanism that exists on this hardware that does not have this
problem is PCI Fundamental reset (warm reset).
Signed-off-by: Brian King <[EMAIL PROTECTED]>
---
James,
This patch was waiting for a generic PCI layer change to get merged,
which has now happened. This patch can now be merged. This is my last
ipr patch for 2.6.22.
Thanks,
Brian
---
linux-2.6-bjking1/drivers/scsi/ipr.c | 70 ++++++++++++++++++++++++++++++++---
linux-2.6-bjking1/drivers/scsi/ipr.h | 8 +++-
2 files changed, 72 insertions(+), 6 deletions(-)
diff -puN drivers/scsi/ipr.h~ipr_pci_reset6 drivers/scsi/ipr.h
--- linux-2.6/drivers/scsi/ipr.h~ipr_pci_reset6 2007-05-07 17:04:09.000000000
-0500
+++ linux-2.6-bjking1/drivers/scsi/ipr.h 2007-05-07 17:04:09.000000000
-0500
@@ -37,7 +37,7 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.4.0"
+#define IPR_DRIVER_VERSION "2.4.1"
#define IPR_DRIVER_DATE "(April 24, 2007)"
/*
@@ -112,6 +112,7 @@
/* Driver data flags */
#define IPR_USE_LONG_TRANSOP_TIMEOUT 0x00000001
+#define IPR_USE_PCI_WARM_RESET 0x00000002
#define IPR_DEFAULT_MAX_ERROR_DUMP 984
#define IPR_NUM_LOG_HCAMS 2
@@ -193,6 +194,7 @@
#define IPR_WAIT_FOR_RESET_TIMEOUT (2 * HZ)
#define IPR_CHECK_FOR_RESET_TIMEOUT (HZ / 10)
#define IPR_WAIT_FOR_BIST_TIMEOUT (2 * HZ)
+#define IPR_PCI_RESET_TIMEOUT (HZ / 2)
#define IPR_DUMP_TIMEOUT (15 * HZ)
/*
@@ -1091,6 +1093,9 @@ struct ipr_ioa_cfg {
u8 allow_ml_add_del:1;
u8 needs_hard_reset:1;
u8 dual_raid:1;
+ u8 needs_warm_reset:1;
+
+ u8 revid;
enum ipr_cache_state cache_state;
u16 type; /* CCIN of the card */
@@ -1184,6 +1189,7 @@ struct ipr_ioa_cfg {
struct pci_pool *ipr_cmd_pool;
struct ipr_cmnd *reset_cmd;
+ int (*reset) (struct ipr_cmnd *);
struct ata_host ata_host;
char ipr_cmd_label[8];
diff -puN drivers/scsi/ipr.c~ipr_pci_reset6 drivers/scsi/ipr.c
--- linux-2.6/drivers/scsi/ipr.c~ipr_pci_reset6 2007-05-07 17:04:09.000000000
-0500
+++ linux-2.6-bjking1/drivers/scsi/ipr.c 2007-05-07 17:04:09.000000000
-0500
@@ -6647,6 +6647,48 @@ static int ipr_reset_start_bist(struct i
}
/**
+ * ipr_reset_slot_reset_done - Clear PCI reset to the adapter
+ * @ipr_cmd: ipr command struct
+ *
+ * Description: This clears PCI reset to the adapter and delays two seconds.
+ *
+ * Return value:
+ * IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_slot_reset_done(struct ipr_cmnd *ipr_cmd)
+{
+ ENTER;
+ pci_set_pcie_reset_state(ipr_cmd->ioa_cfg->pdev, pcie_deassert_reset);
+ ipr_cmd->job_step = ipr_reset_bist_done;
+ ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
+ LEAVE;
+ return IPR_RC_JOB_RETURN;
+}
+
+/**
+ * ipr_reset_slot_reset - Reset the PCI slot of the adapter.
+ * @ipr_cmd: ipr command struct
+ *
+ * Description: This asserts PCI reset to the adapter.
+ *
+ * Return value:
+ * IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_slot_reset(struct ipr_cmnd *ipr_cmd)
+{
+ struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+ struct pci_dev *pdev = ioa_cfg->pdev;
+
+ ENTER;
+ pci_block_user_cfg_access(pdev);
+ pci_set_pcie_reset_state(pdev, pcie_warm_reset);
+ ipr_cmd->job_step = ipr_reset_slot_reset_done;
+ ipr_reset_start_timer(ipr_cmd, IPR_PCI_RESET_TIMEOUT);
+ LEAVE;
+ return IPR_RC_JOB_RETURN;
+}
+
+/**
* ipr_reset_allowed - Query whether or not IOA can be reset
* @ioa_cfg: ioa config struct
*
@@ -6685,7 +6727,7 @@ static int ipr_reset_wait_to_start_bist(
ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
} else {
- ipr_cmd->job_step = ipr_reset_start_bist;
+ ipr_cmd->job_step = ioa_cfg->reset;
rc = IPR_RC_JOB_CONTINUE;
}
@@ -6718,7 +6760,7 @@ static int ipr_reset_alert(struct ipr_cm
writel(IPR_UPROCI_RESET_ALERT,
ioa_cfg->regs.set_uproc_interrupt_reg);
ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
} else {
- ipr_cmd->job_step = ipr_reset_start_bist;
+ ipr_cmd->job_step = ioa_cfg->reset;
}
ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT;
@@ -7000,8 +7042,11 @@ static pci_ers_result_t ipr_pci_slot_res
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
- _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
- IPR_SHUTDOWN_NONE);
+ if (ioa_cfg->needs_warm_reset)
+ ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+ else
+ _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
+ IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
return PCI_ERS_RESULT_RECOVERED;
}
@@ -7489,6 +7534,14 @@ static int __devinit ipr_probe_ioa(struc
else
ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
+ rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid);
+
+ if (rc != PCIBIOS_SUCCESSFUL) {
+ dev_err(&pdev->dev, "Failed to read PCI revision ID\n");
+ rc = -EIO;
+ goto out_scsi_host_put;
+ }
+
ipr_regs_pci = pci_resource_start(pdev, 0);
rc = pci_request_regions(pdev, IPR_NAME);
@@ -7575,6 +7628,13 @@ static int __devinit ipr_probe_ioa(struc
goto cleanup_nolog;
}
+ if ((dev_id->driver_data & IPR_USE_PCI_WARM_RESET) ||
+ (dev_id->device == PCI_DEVICE_ID_IBM_OBSIDIAN_E &&
!ioa_cfg->revid)) {
+ ioa_cfg->needs_warm_reset = 1;
+ ioa_cfg->reset = ipr_reset_slot_reset;
+ } else
+ ioa_cfg->reset = ipr_reset_start_bist;
+
spin_lock(&ipr_driver_lock);
list_add_tail(&ioa_cfg->queue, &ipr_ioa_head);
spin_unlock(&ipr_driver_lock);
@@ -7841,7 +7901,7 @@ static struct pci_device_id ipr_pci_tabl
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0,
- IPR_USE_LONG_TRANSOP_TIMEOUT },
+ IPR_USE_LONG_TRANSOP_TIMEOUT | IPR_USE_PCI_WARM_RESET },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
_
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
