Currently, the scsi error handler will issue a START_UNIT
command if the drive indicates it needs its motor started
and the allow_restart flag is set in the scsi_device. If,
after the scsi error handler invokes a host adapter reset
due to error recovery, a device is in a unit attention
state AND also needs a START_UNIT, that device will be placed
offline. The disk array devices on an ipr RAID adapter
will do exactly this when in a dual initiator configuration.
This patch adds a single retry to the EH initiated
START_UNIT.
Signed-off-by: Brian King <[EMAIL PROTECTED]>
---
linux-2.6-bjking1/drivers/scsi/scsi_error.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)
diff -puN drivers/scsi/scsi_error.c~scsi_eh_stu_retry drivers/scsi/scsi_error.c
--- linux-2.6/drivers/scsi/scsi_error.c~scsi_eh_stu_retry 2007-03-14
15:04:17.000000000 -0500
+++ linux-2.6-bjking1/drivers/scsi/scsi_error.c 2007-03-14 15:04:17.000000000
-0500
@@ -923,12 +923,22 @@ static int scsi_eh_try_stu(struct scsi_c
static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
if (scmd->device->allow_restart) {
- int rtn;
+ int retry_cnt = 1, rtn;
+retry_stu:
rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
START_UNIT_TIMEOUT, 0);
- if (rtn == SUCCESS)
+
+ switch (rtn) {
+ case SUCCESS:
return 0;
+ case NEEDS_RETRY:
+ if (retry_cnt--)
+ goto retry_stu;
+ /*FALLTHRU*/
+ default:
+ return 1;
+ }
}
return 1;
_
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
