You can see if a white paper we put together, which includes information
on tapes, can help you. There's also a small section on "boot from SAN"
which talks about configuring udev in initrd for boot devices. Although
the content references distros, it should be applicable to the kernel
generically.
http://www.emulex.com/white/hba/wp_linux26udev.pdf
-- james s
Andreas Moroder wrote:
Hello,
we have a big problem with scsi device mapping.
We have a LSI Megaraid controller and a qlogic HBA with a attached SAN
When we boot the machine without the SAN then the first disk on the
MEGARAID becomes \dev\sda
When we boot with the SAN attached then the first disk in the san
becomes \dev\sda and the system stop.
Is there a step by step tot availabe on how to configure the udev files
when two SCSI devices are installed in one machine ?
Thanks
Andreas
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
