James,
Some months ago, I had problems with a mis-behaving disk that failed
domain validation on a fusion card resulting in an infinite loop of
domain validation. At the time Eric proposed a patch to the mptspi
driver to reload devices with parameters previously negotiated when a
reset occurred. You indicated that a more generic solution should be
done.
This patch updates spi_dv_device_internal() to check if domain
validation has already been performed on a device and just sets it
previously negotiated parameters. This solved the "infinite domain
validation" loop for me when a reset is performed as a result of command
timeout with the mis-behaving device.
Signed-off-by Mark Haverkamp <[EMAIL PROTECTED]>
---
Applies to scsi-misc-2.6
---
Index: scsi-misc-2.6/drivers/scsi/scsi_transport_spi.c
===================================================================
--- scsi-misc-2.6.orig/drivers/scsi/scsi_transport_spi.c
+++ scsi-misc-2.6/drivers/scsi/scsi_transport_spi.c
@@ -363,6 +363,7 @@ static int child_iter(struct device *dev
{
struct scsi_device *sdev = to_scsi_device(dev);
+ spi_initial_dv(sdev->sdev_target) = 0;
spi_dv_device(sdev);
return 1;
}
@@ -787,6 +788,29 @@ spi_dv_device_internal(struct scsi_devic
struct scsi_target *starget = sdev->sdev_target;
struct Scsi_Host *shost = sdev->host;
int len = sdev->inquiry_len;
+
+ /*
+ * If dv has been done already on this target, just set its
+ * previously determined parameters.
+ */
+ if (spi_initial_dv(starget)) {
+ DV_SET(dt, spi_dt(starget));
+ DV_SET(iu, spi_iu(starget));
+ DV_SET(width, spi_width(starget));
+ DV_SET(offset, spi_offset(starget));
+ DV_SET(period, spi_period(starget));
+ DV_SET(qas, spi_qas(starget));
+ DV_SET(rd_strm, spi_rd_strm(starget));
+ DV_SET(wr_flow, spi_wr_flow(starget));
+ DV_SET(rti, spi_rti(starget));
+ DV_SET(pcomp_en, spi_pcomp_en(starget));
+ if (spi_dv_device_compare_inquiry(sdev, buffer,
+ buffer, DV_LOOPS) == SPI_COMPARE_SUCCESS)
+ return;
+ starget_printk(KERN_ERR, starget,
+ "Domain Validation Inquiry Failed\n");
+ }
+
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
@@ -917,8 +941,10 @@ spi_dv_device(struct scsi_device *sdev)
if (unlikely(scsi_device_get(sdev)))
return;
- if (unlikely(spi_dv_in_progress(starget)))
+ if (unlikely(spi_dv_in_progress(starget))) {
+ scsi_device_put(sdev);
return;
+ }
spi_dv_in_progress(starget) = 1;
buffer = kzalloc(len, GFP_KERNEL);
--
Mark Haverkamp <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
