Received from Mark Salyzyn,
Take the expose_physicals flag and allow the user to select default (physicals
available via /dev/sg), exposed (physicals available via /dev/sd for
experimental reasons) and hidden (physicals blocked from all access). This
expands the functionality of the previous expose_physicals insmod parameter
which was added to support some experimental configurations.
Signed-off-by Mark Haverkamp <[EMAIL PROTECTED]>
---
The patch has been updated after talking with Mark about Christoph's
comments on the previous version of the patch.
--- scsi-misc-aac.orig/drivers/scsi/aacraid/aachba.c 2007-01-25
14:18:02.000000000 -0800
+++ scsi-misc-aac/drivers/scsi/aacraid/aachba.c 2007-01-25 14:19:39.000000000
-0800
@@ -170,9 +170,9 @@
module_param(acbsize, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)
size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion
from Firmware.");
-int expose_physicals = 0;
+int expose_physicals = -1;
module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays.
0=off, 1=on");
+MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays.
-1=protect 0=off, 1=on");
/**
* aac_get_config_status - check the adapter configuration
* @common: adapter to query
--- scsi-misc-aac.orig/drivers/scsi/aacraid/linit.c 2007-01-25
14:18:02.000000000 -0800
+++ scsi-misc-aac/drivers/scsi/aacraid/linit.c 2007-01-25 14:52:13.000000000
-0800
@@ -398,11 +398,15 @@
sdev->skip_ms_page_3f = 1;
}
if ((sdev->type == TYPE_DISK) &&
- !expose_physicals &&
(sdev_channel(sdev) != CONTAINER_CHANNEL)) {
- struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
- if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
- sdev->no_uld_attach = 1;
+ if (expose_physicals == 0)
+ return -ENXIO;
+ if (expose_physicals < 0) {
+ struct aac_dev *aac =
+ (struct aac_dev *)sdev->host->hostdata;
+ if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
+ sdev->no_uld_attach = 1;
+ }
}
if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) == CONTAINER_CHANNEL)) {
--
Mark Haverkamp <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
