Adam Zimman wrote:
Adding VMware engineering...
-----Original Message-----
From: Manon Goo [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 09, 2007 9:49 AM
To: Michael Reed; Moore, Eric; David Berghoff
Cc: James Bottomley; Adam Zimman; linux-scsi@vger.kernel.org; Shirron, Stephen
Subject: Re: [PATCH 2/5] fusion: vmware bug fix prevent inifinite retries
Hmm .... why don't w make the whole thing configurable (david implemented this
for us)
In that case I would prefer going on with automatic detection of our
implementation - see first part of attached mpt-patch.diff I offered
when this all started. As passing options to modules loaded by initrd
is not exactly trivial and varies across distributions, I would prefer
this runtime detection...
Thanks,
Petr Vandrovec
+/*
+ * cmd line parameters
+ */
+static int mpt_mpi_busy;
+module_param(mpt_mpi_busy, int, 0);
+MODULE_PARM_DESC(mpt_mpi_busy, " MPT MPI busy workaround for VMWare ESX
(default=0)");
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
typedef struct _BIG_SENSE_BUF {
@@ -704,10 +711,13 @@
sc->resid=0;
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- if (scsi_status == MPI_SCSI_STATUS_BUSY)
+ if ((scsi_status == MPI_SCSI_STATUS_BUSY) &&
!mpt_mpi_busy)
sc->result = (DID_BUS_BUSY << 16) |
scsi_status;
- else
+ else {
+ if (mpt_mpi_busy)
+ printk(KERN_INFO "MPT MPI ESX busy
hack enabled ... waiting\n");
sc->result = (DID_OK << 16) | scsi_status;
+ }
if (scsi_state == 0) {
;
} else if (scsi_state &
MPI_SCSI_STATE_AUTOSENSE_VALID) {
Patch to fix timeouts during multi-path failover with LSILogic adapter on
RedHat 4.0 Update 3 & 4.
Patch is needed for other distributions as well - for example current Linus's
2.6.19 kernel needs it.
diff -urN linux-2.6.9.orig/drivers/message/fusion/mptbase.c
linux-2.6.9/drivers/message/fusion/mptbase.c
--- linux-2.6.9.orig/drivers/message/fusion/mptbase.c 2006-12-15
11:13:47.000000000 -0800
+++ linux-2.6.9/drivers/message/fusion/mptbase.c 2006-12-15
11:43:01.000000000 -0800
@@ -1435,12 +1435,21 @@
ioc->bus_type = SPI;
/* 1030 Chip Fix. Disable Split transactions
* for PCIX. Set MOST bits to zero if Rev < C0( = 8).
+ *
+ * Also detect VMware's LSILogic emulation - it does
+ * not have PCI-X capability at offset 0x68 (and does
+ * not need disabling split transactions although it
+ * reports itself as revision 1).
*/
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
if (revision < C0_1030) {
- pci_read_config_byte(pdev, 0x6a, &pcixcmd);
- pcixcmd &= 0x8F;
- pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ if (pci_find_capability(pdev, PCI_CAP_ID_PCIX) == 0x68)
{
+ pci_read_config_byte(pdev, 0x6a, &pcixcmd);
+ pcixcmd &= 0x8F;
+ pci_write_config_byte(pdev, 0x6a, pcixcmd);
+ } else {
+ ioc->isVMware = 1;
+ }
}
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
diff -urN linux-2.6.9.orig/drivers/message/fusion/mptbase.h
linux-2.6.9/drivers/message/fusion/mptbase.h
--- linux-2.6.9.orig/drivers/message/fusion/mptbase.h 2006-12-15
11:13:47.000000000 -0800
+++ linux-2.6.9/drivers/message/fusion/mptbase.h 2006-12-15
11:40:47.000000000 -0800
@@ -673,7 +673,8 @@
u8 upload_fw; /* If set, do a fw upload */
u8 reload_fw; /* Force a FW Reload on next
reset */
u8 NBShiftFactor; /* NB Shift Factor based on
Block Size (Facts) */
- u8 pad1[4];
+ u8 isVMware;
+ u8 pad1[3];
int DoneCtx;
int TaskCtx;
int InternalCtx;
diff -urN linux-2.6.9.orig/drivers/message/fusion/mptscsi.c
linux-2.6.9/drivers/message/fusion/mptscsi.c
--- linux-2.6.9.orig/drivers/message/fusion/mptscsi.c 2006-12-15
11:13:47.000000000 -0800
+++ linux-2.6.9/drivers/message/fusion/mptscsi.c 2006-12-15
11:49:18.000000000 -0800
@@ -773,7 +773,12 @@
sc->resid=0;
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- if (scsi_status == MPI_SCSI_STATUS_BUSY)
+ /*
+ * In the case of emulated adapter busy status may be
reported
+ * for minutes when storage path switch occurs in the
firmware.
+ * We definitely do not want to give up after standard
timeout.
+ */
+ if (scsi_status == MPI_SCSI_STATUS_BUSY &&
!ioc->isVMware)
sc->result = (DID_BUS_BUSY << 16) | scsi_status;
else
sc->result = (DID_OK << 16) | scsi_status;
@@ -810,6 +815,7 @@
* Not real sure here either so do nothing...
*/
}
+ /* Perhaps this wanted to test scsi_status and not
sc->result? */
if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
mptscsih_report_queue_full(sc, pScsiReply,
pScsiReq);
