Raymond Scholz wrote:
My initial (private) mail didn't contain any specific hardware
versions. So if it helps to track down the reason for the negotiation
problem, here they are:
LTO tape:
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1823
Type: Sequential-Access ANSI SCSI revision: 03
Controller:
Adaptec AIC79xx driver version: 1.3.11
Adaptec AIC7902 Ultra320 SCSI adapter
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
Here are mine:
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: Ultrium 3-SCSI Rev: G25H
Type: Sequential-Access ANSI SCSI revision: 03
Fusion MPT SPI Host driver 3.04.02
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=19
scsi 1:0:1:0: Sequential-Access HP Ultrium 3-SCSI G25H PQ: 0 ANSI: 3
target1:0:1: Beginning Domain Validation
target1:0:1: Ending Domain Validation
target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI PCOMP (6.25 ns,
offset 64)
Alex
--
Alexander Jolk / BUF Compagnie
tel +33-1 42 68 18 28 / fax +33-1 42 68 18 29
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
