Please apply
Signed-off-by: Eric Moore <[EMAIL PROTECTED]>
>
> Index: scsi-misc-2.6/drivers/message/fusion/mptspi.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/message/fusion/mptspi.c
> 2005-08-17 19:46:11.000000000 +0200
> +++ scsi-misc-2.6/drivers/message/fusion/mptspi.c
> 2005-08-17 19:46:46.000000000 +0200
> @@ -162,15 +162,15 @@
> u8 *mem;
> int error=0;
> int r;
> -
> +
> if ((r = mpt_attach(pdev,id)) != 0)
> return r;
> -
> +
> ioc = pci_get_drvdata(pdev);
> ioc->DoneCtx = mptspiDoneCtx;
> ioc->TaskCtx = mptspiTaskCtx;
> ioc->InternalCtx = mptspiInternalCtx;
> -
> +
> /* Added sanity check on readiness of the MPT adapter.
> */
> if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
> Index: scsi-misc-2.6/drivers/message/fusion/mptbase.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/message/fusion/mptbase.c
> 2005-08-17 19:46:11.000000000 +0200
> +++ scsi-misc-2.6/drivers/message/fusion/mptbase.c
> 2005-08-17 21:22:03.000000000 +0200
> @@ -218,8 +218,7 @@
> * (also referred to as a IO Controller or IOC).
> * This routine must clear the interrupt from the adapter and does
> * so by reading the reply FIFO. Multiple replies may be processed
> - * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
> - * which is currently set to 32 in mptbase.h.
> + * per single call to this routine.
> *
> * This routine handles register-level access of the adapter but
> * dispatches (calls) a protocol-specific callback routine
> to handle
> @@ -279,11 +278,11 @@
> cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
> mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
>
> - dmfprintk((MYIOC_s_INFO_FMT "Got
> non-TURBO reply=%p req_idx=%x\n",
> - ioc->name, mr, req_idx));
> + dmfprintk((MYIOC_s_INFO_FMT "Got
> non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
> + ioc->name, mr, req_idx,
> cb_idx, mr->u.hdr.Function));
> DBG_DUMP_REPLY_FRAME(mr)
>
> - /* Check/log IOC log info
> + /* Check/log IOC log info
> */
> ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
> if (ioc_stat &
> MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
> @@ -345,7 +344,7 @@
> if ((mf) && ((mf >=
> MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
> || (mf < ioc->req_frames)) ) {
> printk(MYIOC_s_WARN_FMT
> - "mpt_interrupt: Invalid
> mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
> + "mpt_interrupt: Invalid
> mf (%p)!\n", ioc->name, (void *)mf);
> cb_idx = 0;
> pa = 0;
> freeme = 0;
> @@ -399,7 +398,7 @@
> * @mf: Pointer to original MPT request frame
> * @reply: Pointer to MPT reply frame (NULL if TurboReply)
> *
> - * Returns 1 indicating original alloc'd request frame ptr
> + * Returns 1 indicating original alloc'd request frame ptr
> * should be freed, or 0 if it shouldn't.
> */
> static int
> @@ -408,28 +407,17 @@
> int freereq = 1;
> u8 func;
>
> - dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n",
> ioc->name));
> -
> - if ((mf == NULL) ||
> - (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
> - printk(MYIOC_s_ERR_FMT "NULL or BAD request
> frame ptr! (=%p)\n",
> - ioc->name, (void *)mf);
> - return 1;
> - }
> -
> - if (reply == NULL) {
> - dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event
> (turbo?) reply!\n",
> - ioc->name));
> - return 1;
> - }
> + dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply()
> called\n", ioc->name));
>
> +#if defined(MPT_DEBUG_MSG_FRAME)
> if (!(reply->u.hdr.MsgFlags &
> MPI_MSGFLAGS_CONTINUATION_REPLY)) {
> dmfprintk((KERN_INFO MYNAM ": Original request
> frame (@%p) header\n", mf));
> DBG_DUMP_REQUEST_FRAME_HDR(mf)
> }
> +#endif
>
> func = reply->u.hdr.Function;
> - dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
> + dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
> ioc->name, func));
>
> if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
> @@ -448,8 +436,14 @@
> * Hmmm... It seems that
> EventNotificationReply is an exception
> * to the rule of one reply per request.
> */
> - if (pEvReply->MsgFlags &
> MPI_MSGFLAGS_CONTINUATION_REPLY)
> + if (pEvReply->MsgFlags &
> MPI_MSGFLAGS_CONTINUATION_REPLY) {
> freereq = 0;
> + devtprintk((MYIOC_s_WARN_FMT
> "EVENT_NOTIFICATION reply %p does not return Request frame\n",
> + ioc->name, pEvReply));
> + } else {
> + devtprintk((MYIOC_s_WARN_FMT
> "EVENT_NOTIFICATION reply %p returns Request frame\n",
> + ioc->name, pEvReply));
> + }
>
> #ifdef CONFIG_PROC_FS
> // LogEvent(ioc, pEvReply);
> @@ -705,7 +699,7 @@
> if (dd_cbfunc->remove)
> dd_cbfunc->remove(ioc->pcidev);
> }
> -
> +
> MptDeviceDriverHandlers[cb_idx] = NULL;
> }
>
> @@ -818,7 +812,7 @@
> }
> #endif
>
> - mf_dma_addr = (ioc->req_frames_low_dma + req_offset) |
> ioc->RequestNB[req_idx];
> + mf_dma_addr = (ioc->req_frames_low_dma + req_offset) |
> ioc->RequestNB[req_idx];
> dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d
> RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
> ioc->RequestNB[req_idx]));
> CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
> }
> @@ -920,7 +914,7 @@
>
> /* Make sure there are no doorbells */
> CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
> -
> +
> CHIPREG_WRITE32(&ioc->chip->Doorbell,
>
> ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
>
> ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
> @@ -935,14 +929,14 @@
> return -5;
>
> dhsprintk((KERN_INFO MYNAM ": %s:
> mpt_send_handshake_request start, WaitCnt=%d\n",
> - ioc->name, ii));
> + ioc->name, ii));
>
> CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
>
> if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
> return -2;
> }
> -
> +
> /* Send request via doorbell handshake */
> req_as_bytes = (u8 *) req;
> for (ii = 0; ii < reqBytes/4; ii++) {
> @@ -988,9 +982,9 @@
> if (ioc->id == iocid) {
> *iocpp =ioc;
> return iocid;
> - }
> + }
> }
> -
> +
> *iocpp = NULL;
> return -1;
> }
> @@ -1032,9 +1026,9 @@
>
> if (pci_enable_device(pdev))
> return r;
> -
> +
> dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
> -
> +
> if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
> dprintk((KERN_INFO MYNAM
> ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
> @@ -1059,7 +1053,7 @@
> ioc->alloc_total = sizeof(MPT_ADAPTER);
> ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /*
> avoid div by zero! */
> ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
> -
> +
> ioc->pcidev = pdev;
> ioc->diagPending = 0;
> spin_lock_init(&ioc->diagLock);
> @@ -1088,7 +1082,7 @@
> /* Find lookup slot. */
> INIT_LIST_HEAD(&ioc->list);
> ioc->id = mpt_ids++;
> -
> +
> mem_phys = msize = 0;
> port = psize = 0;
> for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
> @@ -1143,7 +1137,7 @@
> ioc->prod_name = "LSIFC909";
> ioc->bus_type = FC;
> }
> - if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
> + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
> ioc->prod_name = "LSIFC929";
> ioc->bus_type = FC;
> }
> @@ -1322,7 +1316,7 @@
> remove_proc_entry(pname, NULL);
> sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
> remove_proc_entry(pname, NULL);
> -
> +
> /* call per device driver remove entry point */
> for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
> if(MptDeviceDriverHandlers[ii] &&
> @@ -1330,7 +1324,7 @@
> MptDeviceDriverHandlers[ii]->remove(pdev);
> }
> }
> -
> +
> /* Disable interrupts! */
> CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
>
> @@ -1403,7 +1397,7 @@
> u32 device_state = pdev->current_state;
> int recovery_state;
> int ii;
> -
> +
> printk(MYIOC_s_INFO_FMT
> "pci-resume: pdev=0x%p, slot=%s, Previous operating
> state [D%d]\n",
> ioc->name, pdev, pci_name(pdev), device_state);
> @@ -1534,7 +1528,7 @@
> if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
> break;
> }
> -
> +
>
> if (ii == 5) {
> dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts
> failed rc=%x\n", ioc->name, rc));
> @@ -1542,7 +1536,7 @@
> } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
> MptDisplayIocCapabilities(ioc);
> }
> -
> +
> if (alt_ioc_ready) {
> if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag,
> reason)) != 0) {
> dinitprintk((MYIOC_s_INFO_FMT "Initial
> Alt IocFacts failed rc=%x\n", ioc->name, rc));
> @@ -1613,7 +1607,7 @@
>
> if (reset_alt_ioc_active && ioc->alt_ioc) {
> /* (re)Enable alt-IOC! (reply interrupt) */
> - dprintk((KERN_INFO MYNAM ": alt-%s reply irq
> re-enabled\n",
> + dinitprintk((KERN_INFO MYNAM ": alt-%s reply
> irq re-enabled\n",
> ioc->alt_ioc->name));
> CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
> ~(MPI_HIM_RIM));
> ioc->alt_ioc->active = 1;
> @@ -1670,7 +1664,7 @@
>
> /* Find IM volumes
> */
> - if (ioc->facts.MsgVersion >= 0x0102)
> + if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
> mpt_findImVolumes(ioc);
>
> /* Check, and possibly reset, the
> coalescing value
> @@ -1700,7 +1694,7 @@
> }
>
> if (alt_ioc_ready && MptResetHandlers[ii]) {
> - dprintk((MYIOC_s_INFO_FMT
> "Calling alt-%s post_reset handler #%d\n",
> + drsprintk((MYIOC_s_INFO_FMT
> "Calling alt-%s post_reset handler #%d\n",
> ioc->name,
> ioc->alt_ioc->name, ii));
> rc +=
> (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
> handlers++;
> @@ -1733,8 +1727,8 @@
>
> dprintk((MYIOC_s_INFO_FMT "PCI device %s devfn=%x/%x,"
> " searching for devfn match on %x or %x\n",
> - ioc->name, pci_name(pdev), pdev->devfn,
> - func-1, func+1));
> + ioc->name, pci_name(pdev), pdev->bus->number,
> + pdev->devfn, func-1, func+1));
>
> peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
> if (!peer) {
> @@ -1861,36 +1855,39 @@
> static void
> mpt_adapter_dispose(MPT_ADAPTER *ioc)
> {
> - if (ioc != NULL) {
> - int sz_first, sz_last;
> + int sz_first, sz_last;
>
> - sz_first = ioc->alloc_total;
> + if (ioc == NULL)
> + return;
>
> - mpt_adapter_disable(ioc);
> + sz_first = ioc->alloc_total;
>
> - if (ioc->pci_irq != -1) {
> - free_irq(ioc->pci_irq, ioc);
> - ioc->pci_irq = -1;
> - }
> + mpt_adapter_disable(ioc);
>
> - if (ioc->memmap != NULL)
> - iounmap(ioc->memmap);
> + if (ioc->pci_irq != -1) {
> + free_irq(ioc->pci_irq, ioc);
> + ioc->pci_irq = -1;
> + }
> +
> + if (ioc->memmap != NULL) {
> + iounmap(ioc->memmap);
> + ioc->memmap = NULL;
> + }
>
> #if defined(CONFIG_MTRR) && 0
> - if (ioc->mtrr_reg > 0) {
> - mtrr_del(ioc->mtrr_reg, 0, 0);
> - dprintk((KERN_INFO MYNAM ": %s: MTRR
> region de-registered\n", ioc->name));
> - }
> + if (ioc->mtrr_reg > 0) {
> + mtrr_del(ioc->mtrr_reg, 0, 0);
> + dprintk((KERN_INFO MYNAM ": %s: MTRR region
> de-registered\n", ioc->name));
> + }
> #endif
>
> - /* Zap the adapter lookup ptr! */
> - list_del(&ioc->list);
> + /* Zap the adapter lookup ptr! */
> + list_del(&ioc->list);
>
> - sz_last = ioc->alloc_total;
> - dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d
> bytes\n",
> - ioc->name,
> sz_first-sz_last+(int)sizeof(*ioc), sz_first));
> - kfree(ioc);
> - }
> + sz_last = ioc->alloc_total;
> + dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
> + ioc->name,
> sz_first-sz_last+(int)sizeof(*ioc), sz_first));
> + kfree(ioc);
> }
>
>
> /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> =-=-=-=-=-=-=-=*/
> @@ -1977,7 +1974,7 @@
> }
>
> /* Is it already READY? */
> - if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) ==
> MPI_IOC_STATE_READY)
> + if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) ==
> MPI_IOC_STATE_READY)
> return 0;
>
> /*
> @@ -1995,7 +1992,7 @@
> * Hmmm... Did it get left operational?
> */
> if ((ioc_state & MPI_IOC_STATE_MASK) ==
> MPI_IOC_STATE_OPERATIONAL) {
> - dinitprintk((MYIOC_s_WARN_FMT "IOC operational
> unexpected\n",
> + dinitprintk((MYIOC_s_INFO_FMT "IOC operational
> unexpected\n",
> ioc->name));
>
> /* Check WhoInit.
> @@ -2004,8 +2001,8 @@
> * Else, fall through to KickStart case
> */
> whoinit = (ioc_state &
> MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
> - dprintk((KERN_WARNING MYNAM
> - ": whoinit 0x%x\n statefault %d force %d\n",
> + dinitprintk((KERN_INFO MYNAM
> + ": whoinit 0x%x statefault %d force %d\n",
> whoinit, statefault, force));
> if (whoinit == MPI_WHOINIT_PCI_PEER)
> return -4;
> @@ -2140,8 +2137,8 @@
> get_facts.Function = MPI_FUNCTION_IOC_FACTS;
> /* Assert: All other get_facts fields are zero! */
>
> - dinitprintk((MYIOC_s_INFO_FMT
> - "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
> + dinitprintk((MYIOC_s_INFO_FMT
> + "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
> ioc->name, req_sz, reply_sz));
>
> /* No non-zero fields in the get_facts request are greater than
> @@ -2221,7 +2218,7 @@
> if ( sz & 0x02 )
> sz += 2;
> facts->FWImageSize = sz;
> -
> +
> if (!facts->RequestFrameSize) {
> /* Something is wrong! */
> printk(MYIOC_s_ERR_FMT "IOC reported
> invalid 0 request size!\n",
> @@ -2240,7 +2237,7 @@
> ioc->NBShiftFactor = shiftFactor;
> dinitprintk((MYIOC_s_INFO_FMT
> "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
> ioc->name, vv, shiftFactor, r));
> -
> +
> if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
> /*
> * Set values for this IOC's request &
> reply frame sizes,
> @@ -2261,7 +2258,7 @@
> return r;
> }
> } else {
> - printk(MYIOC_s_ERR_FMT
> + printk(MYIOC_s_ERR_FMT
> "Invalid IOC facts reply, msgLength=%d
> offsetof=%zd!\n",
> ioc->name, facts->MsgLength,
> (offsetof(IOCFactsReply_t,
> RequestFrameSize)/sizeof(u32)));
> @@ -2413,9 +2410,11 @@
>
> dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
> ioc->name, &ioc_init));
> -
> - if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
> +
> + if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
> + printk(MYIOC_s_ERR_FMT "Sending PortEnable
> failed(%d)!\n",ioc->name, r);
> return r;
> + }
>
> /* YIKES! SUPER IMPORTANT!!!
> * Poll IocState until _OPERATIONAL while IOC is doing
> @@ -2440,7 +2439,7 @@
> state = mpt_GetIocState(ioc, 1);
> count++;
> }
> - dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait
> IOC_OPERATIONAL state (cnt=%d)\n",
> + dinitprintk((MYIOC_s_INFO_FMT "INFO - Wait
> IOC_OPERATIONAL state (cnt=%d)\n",
> ioc->name, count));
>
> return r;
> @@ -2529,7 +2528,7 @@
> int sz;
>
> sz = ioc->facts.FWImageSize;
> - dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW
> Image @ %p[%p], sz=%d[%x] bytes\n",
> + dinitprintk((KERN_INFO MYNAM "free_fw_memory: FW Image
> @ %p[%p], sz=%d[%x] bytes\n",
> ioc->cached_fw, (void
> *)(ulong)ioc->cached_fw_dma, sz, sz));
> pci_free_consistent(ioc->pcidev, sz,
> ioc->cached_fw, ioc->cached_fw_dma);
> @@ -2573,9 +2572,9 @@
>
> mpt_alloc_fw_memory(ioc, sz);
>
> - dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p],
> sz=%d[%x] bytes\n",
> + dinitprintk((KERN_INFO MYNAM ": FW Image @ %p[%p],
> sz=%d[%x] bytes\n",
> ioc->cached_fw, (void
> *)(ulong)ioc->cached_fw_dma, sz, sz));
> -
> +
> if (ioc->cached_fw == NULL) {
> /* Major Failure.
> */
> @@ -2605,14 +2604,14 @@
> mpt_add_sge(&request[sgeoffset], flagsLength,
> ioc->cached_fw_dma);
>
> sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
> - dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req
> @ %p) sgeoffset=%d \n",
> + dinitprintk((KERN_INFO MYNAM ": Sending FW Upload (req
> @ %p) sgeoffset=%d \n",
> prequest, sgeoffset));
> DBG_DUMP_FW_REQUEST_FRAME(prequest)
>
> ii = mpt_handshake_req_reply_wait(ioc, sgeoffset,
> (u32*)prequest,
> reply_sz, (u16*)preply, 65
> /*seconds*/, sleepFlag);
>
> - dinitprintk((KERN_WARNING MYNAM "FW Upload completed
> rc=%x \n", ii));
> + dinitprintk((KERN_INFO MYNAM ": FW Upload completed
> rc=%x \n", ii));
>
> cmdStatus = -EFAULT;
> if (ii == 0) {
> @@ -2627,10 +2626,10 @@
> cmdStatus = 0;
> }
> }
> - dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
> + dinitprintk((MYIOC_s_INFO_FMT ": do_upload cmdStatus=%d \n",
> ioc->name, cmdStatus));
>
> -
> +
> if (cmdStatus) {
>
> ddlprintk((MYIOC_s_INFO_FMT ": fw upload
> failed, freeing image \n",
> @@ -2761,8 +2760,8 @@
> fwSize = (pExtImage->ImageSize + 3) >> 2;
> ptrFw = (u32 *)pExtImage;
>
> - ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image:
> 0x%x bytes @ %p load_addr=%x\n",
> - ioc->name,
> fwSize*4, ptrFw, load_addr));
> + ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image:
> 0x%x (%d) bytes @ %p load_addr=%x\n",
> + ioc->name,
> fwSize*4, fwSize*4, ptrFw, load_addr));
>
> CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
>
> while (fwSize--) {
> @@ -2845,9 +2844,9 @@
> * 0 else
> *
> * Returns:
> - * 1 - hard reset, READY
> - * 0 - no reset due to History bit, READY
> - * -1 - no reset due to History bit but not READY
> + * 1 - hard reset, READY
> + * 0 - no reset due to History bit, READY
> + * -1 - no reset due to History bit but not READY
> * OR reset but failed to come READY
> * -2 - no reset, could not enter DIAG mode
> * -3 - reset but bad FW bit
> @@ -2990,7 +2989,7 @@
> *
> */
> CHIPREG_WRITE32(&ioc->chip->Diagnostic,
> diag0val | MPI_DIAG_DISABLE_ARM);
> - mdelay (1);
> + mdelay(1);
>
> /*
> * Now hit the reset bit in the Diagnostic register
> @@ -3170,7 +3169,7 @@
> u32 state;
> int cntdn, count;
>
> - drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC
> reset(0x%02x)!\n",
> + drsprintk((KERN_INFO MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
> ioc->name, reset_type));
> CHIPREG_WRITE32(&ioc->chip->Doorbell,
> reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
> if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
> @@ -3374,6 +3373,9 @@
> ioc->reply_frames = (MPT_FRAME_HDR *) mem;
> ioc->reply_frames_low_dma = (u32) (alloc_dma &
> 0xFFFFFFFF);
>
> + dinitprintk((KERN_INFO MYNAM ": %s ReplyBuffers
> @ %p[%p]\n",
> + ioc->name, ioc->reply_frames, (void
> *)(ulong)alloc_dma));
> +
> alloc_dma += reply_sz;
> mem += reply_sz;
>
> @@ -3382,7 +3384,7 @@
> ioc->req_frames = (MPT_FRAME_HDR *) mem;
> ioc->req_frames_dma = alloc_dma;
>
> - dinitprintk((KERN_INFO MYNAM ":
> %s.RequestBuffers @ %p[%p]\n",
> + dinitprintk((KERN_INFO MYNAM ": %s
> RequestBuffers @ %p[%p]\n",
> ioc->name, mem, (void
> *)(ulong)alloc_dma));
>
> ioc->req_frames_low_dma = (u32) (alloc_dma &
> 0xFFFFFFFF);
> @@ -3408,7 +3410,7 @@
> ioc->ChainBuffer = mem;
> ioc->ChainBufferDMA = alloc_dma;
>
> - dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers
> @ %p(%p)\n",
> + dinitprintk((KERN_INFO MYNAM " :%s ChainBuffers
> @ %p(%p)\n",
> ioc->name, ioc->ChainBuffer, (void
> *)(ulong)ioc->ChainBufferDMA));
>
> /* Initialize the free chain Q.
> @@ -3513,7 +3515,7 @@
> */
> static int
> mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
> u32 *req,
> - int replyBytes, u16 *u16reply,
> int maxwait, int sleepFlag)
> + int replyBytes, u16 *u16reply, int maxwait, int
> sleepFlag)
> {
> MPIDefaultReply_t *mptReply;
> int failcnt = 0;
> @@ -3588,7 +3590,7 @@
> */
> if (!failcnt && (t = WaitForDoorbellReply(ioc,
> maxwait, sleepFlag)) < 0)
> failcnt++;
> -
> +
> dhsprintk((MYIOC_s_INFO_FMT "HandShake reply
> count=%d%s\n",
> ioc->name, t, failcnt ? " -
> MISSING DOORBELL REPLY!" : ""));
>
> @@ -3747,7 +3749,7 @@
> }
>
> dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake
> reply word=%08x%s\n",
> - ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
> + ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
> failcnt ? " - MISSING DOORBELL
> HANDSHAKE!" : ""));
>
> /*
> @@ -4122,6 +4124,8 @@
> ioc->spi_data.minSyncFactor = MPT_ASYNC;
> ioc->spi_data.busType =
> MPT_HOST_BUS_UNKNOWN;
> rc = 1;
> + ddvprintk((MYIOC_s_INFO_FMT
> "Unable to read PortPage0 minSyncFactor=%x\n",
> + ioc->name,
> ioc->spi_data.minSyncFactor));
> } else {
> /* Save the Port Page 0 data
> */
> @@ -4131,7 +4135,7 @@
>
> if ( (pPP0->Capabilities &
> MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
> ioc->spi_data.noQas |=
> MPT_TARGET_NO_NEGO_QAS;
> - dinitprintk((KERN_INFO
> MYNAM " :%s noQas due to Capabilities=%x\n",
> + ddvprintk((KERN_INFO
> MYNAM " :%s noQas due to Capabilities=%x\n",
> ioc->name,
> pPP0->Capabilities));
> }
> ioc->spi_data.maxBusWidth =
> pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
> @@ -4140,6 +4144,8 @@
>
> ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
> data =
> pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
>
> ioc->spi_data.minSyncFactor = (u8) (data >> 8);
> +
> ddvprintk((MYIOC_s_INFO_FMT "PortPage0 minSyncFactor=%x\n",
> + ioc->name,
> ioc->spi_data.minSyncFactor));
> } else {
> ioc->spi_data.maxSyncOffset = 0;
>
> ioc->spi_data.minSyncFactor = MPT_ASYNC;
> @@ -4152,8 +4158,11 @@
> if ((ioc->spi_data.busType ==
> MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
> (ioc->spi_data.busType
> == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
>
> - if (ioc->spi_data.minSyncFactor
> < MPT_ULTRA)
> + if
> (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
>
> ioc->spi_data.minSyncFactor = MPT_ULTRA;
> +
> ddvprintk((MYIOC_s_INFO_FMT "HVD or SE detected, minSyncFactor=%x\n",
> +
> ioc->name, ioc->spi_data.minSyncFactor));
> + }
> }
> }
> if (pbuf) {
> @@ -4580,13 +4589,13 @@
>
> evnp = (EventNotification_t *)
> mpt_get_msg_frame(mpt_base_index, ioc);
> if (evnp == NULL) {
> - dprintk((MYIOC_s_WARN_FMT "Unable to allocate
> event request frame!\n",
> + devtprintk((MYIOC_s_WARN_FMT "Unable to
> allocate event request frame!\n",
> ioc->name));
> return 0;
> }
> memset(evnp, 0, sizeof(*evnp));
>
> - dprintk((MYIOC_s_INFO_FMT "Sending
> EventNotification(%d)\n", ioc->name, EvSwitch));
> + devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification
> (%d) request %p\n", ioc->name, EvSwitch, evnp));
>
> evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
> evnp->ChainOffset = 0;
> @@ -4610,8 +4619,10 @@
> EventAck_t *pAck;
>
> if ((pAck = (EventAck_t *)
> mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
> - printk(MYIOC_s_WARN_FMT "Unable to allocate
> event ACK request frame!\n",
> - ioc->name);
> + printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK "
> + "request frame for Event=%x
> EventContext=%x EventData=%x!\n",
> + ioc->name, evnp->Event,
> le32_to_cpu(evnp->EventContext),
> + le32_to_cpu(evnp->Data[0]));
> return -1;
> }
> memset(pAck, 0, sizeof(*pAck));
> @@ -5504,6 +5515,8 @@
> * If needed, send (a single) EventAck.
> */
> if (pEventReply->AckRequired ==
> MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
> + devtprintk((MYIOC_s_WARN_FMT
> + "EventAck required\n",ioc->name));
> if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
> devtprintk((MYIOC_s_WARN_FMT
> "SendEventAck returned %d\n",
> ioc->name, ii));
> @@ -5584,7 +5597,7 @@
> case 0x00080000:
> desc = "Outbound DMA Overrun";
> break;
> -
> +
> case 0x00090000:
> desc = "Task Management";
> break;
> @@ -5600,7 +5613,7 @@
> case 0x000C0000:
> desc = "Untagged Table Size";
> break;
> -
> +
> }
>
> printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n",
> ioc->name, log_info, desc);
> @@ -5692,7 +5705,7 @@
> break;
>
> case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
> - /* This error is checked in scsi_io_done(). Skip.
> + /* This error is checked in scsi_io_done(). Skip.
> desc = "SCSI Data Underrun";
> */
> break;
> Index: scsi-misc-2.6/drivers/message/fusion/mptscsih.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/message/fusion/mptscsih.c
> 2005-08-17 19:46:11.000000000 +0200
> +++ scsi-misc-2.6/drivers/message/fusion/mptscsih.c
> 2005-08-17 21:22:03.000000000 +0200
> @@ -281,12 +281,12 @@
> offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
> chain_idx = offset / ioc->req_sz;
> rc = SUCCESS;
> - dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer
> (index %d), got buf=%p\n",
> - ioc->name, *retIndex, chainBuf));
> + dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer
> chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
> + ioc->name, chainBuf, ioc->ChainBuffer,
> offset, chain_idx));
> } else {
> rc = FAILED;
> chain_idx = MPT_HOST_NO_CHAIN;
> - dfailprintk((MYIOC_s_ERR_FMT
> "getFreeChainBuffer failed\n",
> + dfailprintk((MYIOC_s_INFO_FMT
> "getFreeChainBuffer failed\n",
> ioc->name));
> }
> spin_unlock_irqrestore(&ioc->FreeQlock, flags);
> @@ -432,7 +432,7 @@
> */
> pReq->ChainOffset = 0;
> RequestNB = (((sgeOffset - 1) >>
> ioc->NBShiftFactor) + 1) & 0x03;
> - dsgprintk((MYIOC_s_ERR_FMT
> + dsgprintk((MYIOC_s_INFO_FMT
> "Single Buffer RequestNB=%x,
> sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
> ioc->RequestNB[req_idx] = RequestNB;
> }
> @@ -491,11 +491,12 @@
> /* NOTE: psge points to the beginning of the
> chain element
> * in current buffer. Get a chain buffer.
> */
> - dsgprintk((MYIOC_s_INFO_FMT
> - "calling getFreeChainBuffer SCSI cmd=%02x (%p)\n",
> - ioc->name, pReq->CDB[0], SCpnt));
> - if ((mptscsih_getFreeChainBuffer(ioc,
> &newIndex)) == FAILED)
> + if ((mptscsih_getFreeChainBuffer(ioc,
> &newIndex)) == FAILED) {
> + dfailprintk((MYIOC_s_INFO_FMT
> + "getFreeChainBuffer FAILED SCSI
> cmd=%02x (%p)\n",
> + ioc->name, pReq->CDB[0], SCpnt));
> return FAILED;
> + }
>
> /* Update the tracking arrays.
> * If chainSge == NULL, update ReqToChain, else
> ChainToChain
> @@ -577,14 +578,20 @@
> return 1;
> }
>
> - dmfprintk((MYIOC_s_INFO_FMT
> - "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
> - ioc->name, mf, mr, sc, req_idx));
> -
> sc->result = DID_OK << 16; /* Set default
> reply as OK */
> pScsiReq = (SCSIIORequest_t *) mf;
> pScsiReply = (SCSIIOReply_t *) mr;
>
> + if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
> + dmfprintk((MYIOC_s_INFO_FMT
> + "ScsiDone
> (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
> + ioc->name, mf, mr, sc, req_idx,
> pScsiReply->TaskTag));
> + }else{
> + dmfprintk((MYIOC_s_INFO_FMT
> + "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
> + ioc->name, mf, mr, sc, req_idx));
> + }
> +
> if (pScsiReply == NULL) {
> /* special context reply handling */
> ;
> @@ -658,8 +665,8 @@
> /* Sufficient data transfer occurred */
> sc->result = (DID_OK << 16) |
> scsi_status;
> } else if ( xfer_cnt == 0 ) {
> - /* A CRC Error causes this
> condition; retry */
> - sc->result = (DRIVER_SENSE <<
> 24) | (DID_OK << 16) |
> + /* A CRC Error causes this
> condition; retry */
> + sc->result = (DRIVER_SENSE <<
> 24) | (DID_OK << 16) |
> (CHECK_CONDITION << 1);
> sc->sense_buffer[0] = 0x70;
> sc->sense_buffer[2] = NO_SENSE;
> @@ -668,7 +675,9 @@
> } else {
> sc->result = DID_SOFT_ERROR << 16;
> }
> - dreplyprintk((KERN_NOTICE
> "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->target));
> + dreplyprintk((KERN_NOTICE
> + "RESIDUAL_MISMATCH: result=%x on id=%d\n",
> + sc->result, sc->device->id));
> break;
>
> case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
> /* 0x0045 */
> @@ -796,7 +805,6 @@
> return 1;
> }
>
> -
> /*
> * mptscsih_flush_running_cmds - For each command found, search
> * Scsi_Host instance taskQ and reply to OS.
> @@ -1017,7 +1025,7 @@
> scsi_host_put(host);
>
> mpt_detach(pdev);
> -
> +
> }
>
>
> /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> =-=-=-=-=-=-=-=*/
> @@ -1072,7 +1080,7 @@
> MPT_SCSI_HOST *hd;
>
> mpt_resume(pdev);
> -
> +
> if(!host)
> return 0;
>
> @@ -1214,8 +1222,8 @@
> int size = 0;
>
> if (func) {
> - /*
> - * write is not supported
> + /*
> + * write is not supported
> */
> } else {
> if (start)
> @@ -1535,17 +1543,17 @@
> */
> if (mptscsih_tm_pending_wait(hd) == FAILED) {
> if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
> - dtmprintk((KERN_WARNING MYNAM ": %s:
> TMHandler abort: "
> + dtmprintk((KERN_INFO MYNAM ": %s:
> TMHandler abort: "
> "Timed out waiting for last TM (%d)
> to complete! \n",
> hd->ioc->name, hd->tmPending));
> return FAILED;
> } else if (type ==
> MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
> - dtmprintk((KERN_WARNING MYNAM ": %s:
> TMHandler target reset: "
> + dtmprintk((KERN_INFO MYNAM ": %s:
> TMHandler target reset: "
> "Timed out waiting for last TM (%d)
> to complete! \n",
> hd->ioc->name, hd->tmPending));
> return FAILED;
> } else if (type ==
> MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
> - dtmprintk((KERN_WARNING MYNAM ": %s:
> TMHandler bus reset: "
> + dtmprintk((KERN_INFO MYNAM ": %s:
> TMHandler bus reset: "
> "Timed out waiting for last TM (%d)
> to complete! \n",
> hd->ioc->name, hd->tmPending));
> if (hd->tmPending & (1 <<
> MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
> @@ -1631,8 +1639,7 @@
> if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc))
> == NULL) {
> dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no
> msg frames!!\n",
> hd->ioc->name));
> - //return FAILED;
> - return -999;
> + return FAILED;
> }
> dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
> hd->ioc->name, mf));
> @@ -1661,9 +1668,8 @@
>
> pScsiTm->TaskMsgContext = ctx2abort;
>
> - dtmprintk((MYIOC_s_INFO_FMT
> - "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
> - hd->ioc->name, ctx2abort, type));
> + dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort
> (0x%08x) type=%d\n",
> + hd->ioc->name, ctx2abort, type));
>
> DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
>
> @@ -1902,13 +1908,13 @@
>
> /* If we can't locate the host to reset, then we failed. */
> if ((hd = (MPT_SCSI_HOST *)
> SCpnt->device->host->hostdata) == NULL){
> - dtmprintk( ( KERN_WARNING MYNAM ":
> mptscsih_host_reset: "
> + dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
> "Can't locate host! (sc=%p)\n",
> SCpnt ) );
> return FAILED;
> }
>
> - printk(KERN_WARNING MYNAM ": %s: >> Attempting host
> reset! (sc=%p)\n",
> + printk(KERN_WARNING MYNAM ": %s: Attempting host reset!
> (sc=%p)\n",
> hd->ioc->name, SCpnt);
>
> /* If our attempts to reset the host failed, then
> return a failed
> @@ -1924,7 +1930,7 @@
> hd->tmState = TM_STATE_NONE;
> }
>
> - dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
> + dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
> "Status = %s\n",
> (status == SUCCESS) ? "SUCCESS" : "FAILED" ) );
>
> @@ -1951,8 +1957,8 @@
> if (hd->tmState == TM_STATE_NONE) {
> hd->tmState = TM_STATE_IN_PROGRESS;
> hd->tmPending = 1;
> - status = SUCCESS;
>
> spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
> + status = SUCCESS;
> break;
> }
> spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
> @@ -1980,7 +1986,7 @@
> spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
> if(hd->tmPending == 0) {
> status = SUCCESS;
> -
> spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
> +
> spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
> break;
> }
> spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
> @@ -2318,10 +2324,10 @@
> if (pTarget == NULL) {
> /* Driver doesn't know about this device.
> * Kernel may generate a "Dummy Lun 0" which
> - * may become a real Lun if a
> + * may become a real Lun if a
> * "scsi add-single-device" command is executed
> - * while the driver is active (hot-plug a
> - * device). LSI Raid controllers need
> + * while the driver is active (hot-plug a
> + * device). LSI Raid controllers need
> * queue_depth set to DEV_HIGH for this reason.
> */
> scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
> @@ -2691,7 +2697,7 @@
> * If the peripheral qualifier filter is enabled then
> if the target reports a 0x1
> * (i.e. The targer is capable of supporting the
> specified peripheral device type
> * on this logical unit; however, the physical device
> is not currently connected
> - * to this logical unit) it will be converted to a 0x3
> (i.e. The target is not
> + * to this logical unit) it will be converted to a 0x3
> (i.e. The target is not
> * capable of supporting a physical device on this
> logical unit). This is to work
> * around a bug in th emid-layer in some distributions
> in which the mid-layer will
> * continue to try to communicate to the LUN and
> evntually create a dummy LUN.
> @@ -3194,8 +3200,8 @@
> /* Get a MF for this command.
> */
> if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc))
> == NULL) {
> - dprintk((MYIOC_s_WARN_FMT "write SDP1:
> no msg frames!\n",
> - ioc->name));
> + dfailprintk((MYIOC_s_WARN_FMT "write
> SDP1: no msg frames!\n",
> + ioc->name));
> return -EAGAIN;
> }
>
> @@ -3289,7 +3295,7 @@
> /* Get a MF for this command.
> */
> if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
> - dprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no
> msg frames!\n",
> + dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 :
> no msg frames!\n",
> ioc->name));
> return -EAGAIN;
> }
> @@ -4596,8 +4602,8 @@
> if ((pbuf1[56] & 0x02) == 0) {
> pTarget->negoFlags |=
> MPT_TARGET_NO_NEGO_QAS;
> hd->ioc->spi_data.noQas
> = MPT_TARGET_NO_NEGO_QAS;
> - ddvprintk((MYIOC_s_NOTE_FMT
> - "DV: Start Basic
> noQas on id=%d due to pbuf1[56]=%x\n",
> + ddvprintk((MYIOC_s_NOTE_FMT
> + "DV: Start Basic
> noQas on id=%d due to pbuf1[56]=%x\n",
> ioc->name, id, pbuf1[56]));
> }
> }
> @@ -4673,7 +4679,7 @@
> if (!firstPass)
> doFallback = 1;
> } else {
> -
> ddvprintk((MYIOC_s_NOTE_FMT
> +
> ddvprintk((MYIOC_s_NOTE_FMT
> "DV:Inquiry
> compared id=%d, calling initTarget\n", ioc->name, id));
>
> hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
> mptscsih_initTarget(hd,
> @@ -4689,8 +4695,8 @@
>
> } else if (rc == MPT_SCANDV_ISSUE_SENSE)
> doFallback = 1; /* set fallback flag */
> - else if ((rc == MPT_SCANDV_DID_RESET) ||
> - (rc == MPT_SCANDV_SENSE) ||
> + else if ((rc == MPT_SCANDV_DID_RESET) ||
> + (rc == MPT_SCANDV_SENSE) ||
> (rc == MPT_SCANDV_FALLBACK))
> doFallback = 1; /* set fallback flag */
> else
> @@ -5126,7 +5132,7 @@
> */
> if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
> hd->ioc->spi_data.noQas =
> MPT_TARGET_NO_NEGO_QAS;
> - ddvprintk((MYIOC_s_NOTE_FMT
> + ddvprintk((MYIOC_s_NOTE_FMT
> "noQas set due to id=%d has
> factor=%x\n", ioc->name, id, dv.now.factor));
> }
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
