> On Fri, 2005-08-05 at 07:36 -0700, Martin J. Bligh wrote: >> Howcome it works on all mainline kernels, and not -mm then? ;-) >> Did we fix an error path to detect failures, maybe? > > Well, OK, it might be something to do with your drives trying to > negotiate IU and QAS. Support for this was added to the sym2 driver but > never verified (because no-one seemed to have drives that could do it). > > The attached should stop the driver from negotiating these two > parameters, if you could try it (it will produce complaints about static > functions defined but not used, but you can ignore them).
Nope, is the same as before with this patch .... M. > James > > diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c > b/drivers/scsi/sym53c8xx_2/sym_glue.c > --- a/drivers/scsi/sym53c8xx_2/sym_glue.c > +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c > @@ -2122,10 +2122,12 @@ static struct spi_function_template sym2 > .show_width = 1, > .set_dt = sym2_set_dt, > .show_dt = 1, > +#if 0 > .set_iu = sym2_set_iu, > .show_iu = 1, > .set_qas = sym2_set_qas, > .show_qas = 1, > +#endif > .get_signalling = sym2_get_signalling, > }; > > > > > - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
