02_scsi_reqfn_move_preps_to_prep_fn.patch
Move request preparations scattered in scsi_request_fn() and
scsi_dispatch_cmd() into scsi_prep_fn()
* CDB_SIZE check in scsi_dispatch_cmd()
* SCSI-2 LUN preparation in scsi_dispatch_cmd()
No invalid request reaches scsi_request_fn() anymore.
Note that scsi_init_cmd_errh() is still left in
scsi_request_fn(). As all requeued requests need its sense
buffer and result value cleared, we can't move this to
prep_fn() yet. This is moved into prep_fn in the following
requeue path consoildation patchset.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
scsi.c | 30 ------------------------------
scsi_lib.c | 17 +++++++++++++++++
2 files changed, 17 insertions(+), 30 deletions(-)
Index: scsi-reqfn-export/drivers/scsi/scsi.c
===================================================================
--- scsi-reqfn-export.orig/drivers/scsi/scsi.c 2005-04-12 19:27:54.000000000
+0900
+++ scsi-reqfn-export/drivers/scsi/scsi.c 2005-04-12 19:27:55.000000000
+0900
@@ -79,15 +79,6 @@
#define MIN_RESET_PERIOD (15*HZ)
/*
- * Macro to determine the size of SCSI command. This macro takes vendor
- * unique commands into account. SCSI commands in groups 6 and 7 are
- * vendor unique and we will depend upon the command length being
- * supplied correctly in cmd_len.
- */
-#define CDB_SIZE(cmd) (((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \
- COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len)
-
-/*
* Note - the initial logging level can be set here to log events at boot time.
* After the system is up, you may enable logging via the /proc interface.
*/
@@ -566,14 +557,6 @@ int scsi_dispatch_cmd(struct scsi_cmnd *
goto out;
}
- /*
- * If SCSI-2 or lower, store the LUN value in cmnd.
- */
- if (cmd->device->scsi_level <= SCSI_2) {
- cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
- (cmd->device->lun << 5 & 0xe0);
- }
-
/*
* We will wait MIN_RESET_DELAY clock ticks after the last reset so
* we can avoid the drive not being ready.
@@ -614,19 +597,6 @@ int scsi_dispatch_cmd(struct scsi_cmnd *
atomic_inc(&cmd->device->iorequest_cnt);
- /*
- * Before we queue this command, check if the command
- * length exceeds what the host adapter can handle.
- */
- if (CDB_SIZE(cmd) > cmd->device->host->max_cmd_len) {
- SCSI_LOG_MLQUEUE(3,
- printk("queuecommand : command too long.\n"));
- cmd->result = (DID_ABORT << 16);
-
- scsi_done(cmd);
- goto out;
- }
-
spin_lock_irqsave(host->host_lock, flags);
scsi_cmd_get_serial(host, cmd);
Index: scsi-reqfn-export/drivers/scsi/scsi_lib.c
===================================================================
--- scsi-reqfn-export.orig/drivers/scsi/scsi_lib.c 2005-04-12
19:27:55.000000000 +0900
+++ scsi-reqfn-export/drivers/scsi/scsi_lib.c 2005-04-12 19:27:55.000000000
+0900
@@ -28,6 +28,14 @@
#include "scsi_priv.h"
#include "scsi_logging.h"
+/*
+ * Macro to determine the size of SCSI command. This macro takes vendor
+ * unique commands into account. SCSI commands in groups 6 and 7 are
+ * vendor unique and we will depend upon the command length being
+ * supplied correctly in cmd_len.
+ */
+#define CDB_SIZE(cmd) (((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \
+ COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len)
#define SG_MEMPOOL_NR (sizeof(scsi_sg_pools)/sizeof(struct
scsi_host_sg_pool))
#define SG_MEMPOOL_SIZE 32
@@ -1160,6 +1168,15 @@ static int scsi_prep_fn(struct request_q
goto kill;
}
+ /* Check command length. */
+ if (CDB_SIZE(cmd) > sdev->host->max_cmd_len)
+ goto kill;
+
+ /* If SCSI-2 or lower, store the LUN value in cmnd. */
+ if (cmd->device->scsi_level <= SCSI_2)
+ cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
+ (cmd->device->lun << 5 & 0xe0);
+
/*
* The request is now prepped, no need to come back here
*/
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
