drivers/scsi/Kconfig changes.

         Signed-off-by: Alex Aizman <[EMAIL PROTECTED]>
         Signed-off-by: Dmitry Yusupov <[EMAIL PROTECTED]>








diff -Nru --exclude 'iscsi*' --exclude Makefile 
linux-2.6.11.orig/drivers/scsi/Kconfig linux-2.6.11.dima/drivers/scsi/Kconfig
--- linux-2.6.11.orig/drivers/scsi/Kconfig      2005-03-01 23:38:25.000000000 
-0800
+++ linux-2.6.11.dima/drivers/scsi/Kconfig      2005-03-04 17:50:11.141413333 
-0800
@@ -185,6 +185,44 @@
          there should be no noticeable performance impact as long as you have
          logging turned off.
 
+config ISCSI_IF
+       tristate "iSCSI Open Transport Interface"
+       depends on SCSI && INET
+       ---help---
+       To compile this driver as a module, choose M here: the
+       module will be called iscsi_if.
+
+       This driver manages multiple iSCSI transports. This module is required
+       for normal iscsid operation.
+
+       See more detailed information here:
+
+       http://www.open-iscsi.org
+
+config ISCSI_TCP
+       tristate "iSCSI Initiator over TCP/IP"
+       depends on ISCSI_IF
+       default y
+       select CRYPTO
+       select CRYPTO_MD5
+       select CRYPTO_CRC32C
+       ---help---
+       To compile this driver as a module, choose M here: the
+       module will be called iscsi_tcp.
+
+       The iSCSI Driver provides a host with the ability to access storage
+       through an IP network. The driver uses the iSCSI protocol to transport
+       SCSI requests and responses over a TCP/IP network between the host
+       (the "initiator") and "targets".  Architecturally, the iSCSI driver
+       combines with the host's TCP/IP stack, network drivers, and Network
+       Interface Card (NIC) to provide the same functions as a SCSI or a
+       Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
+ 
+       The userspace component needed to initialize the driver, documentation,
+       and sample configuration files can be found here:
+ 
+       http://www.open-iscsi.org
+
 menu "SCSI Transport Attributes"
        depends on SCSI
 









Reply via email to