On Sun, 27 Feb 2005 13:46:00 -0500, Dave Wysochanski <[EMAIL PROTECTED]> wrote: > AJ Lewis wrote: > > > "Nicholas A. Bellinger" <[EMAIL PROTECTED]> writes: > > > > > The following is the first public release of the PyX Technologies iSCSI > > > Initiator Core Stack v1.6.1.20 for Linux 2.6.11-rc4. This is a full > > > featured iSCSI Initiator stack that is capable of mulitplexing coast to > > > coast across multiple independant backbone providers using various > > > network transports _TODAY_. This is the first release of the core > > stack > > > and assoicated userspace tools, the accompanying authentication daemon > > > will be released shortly. > > > > Very cool - glad you're releasing this. I've gotten this setup and > > running, but I can't seem to talk to my iscsi target. The initiator > > detects it, but it can't recognize the type: > > > > iCHANNEL[0] - No defined iSCSI Authentication Methods, skipping > > SecurityNegotiation phase. > > iCHANNEL[0] - iSCSI login successful on CID: 0 to 192.168.44.19:3260,2 > > iCHANNEL[0] - Incremented iSCSI connection count to 1 to node: > > iqn.1992-08.com.netapp:sn.33615311 > > iCHANNEL[0] - Established iSCSI session to node: > > iqn.1992-08.com.netapp:sn.33615311 > > iSCSI Core Stack[1] - Incremented number of active iSCSI sessions to 1. > > scsi: unknown device type 31 > > Vendor: NETAPP Model: LUN Rev: 0.2 > > Type: Unknown ANSI SCSI revision: 04 > > > > Any ideas on why this wouldn't be working? Is there a configuration > > step I'm missing? > > > Make sure the initiator name is in the igroup on the filer for > any luns that you want mapped to the intiator. > > I think what you're seeing is not a real LUN, but the config LUN > or something like that, probably the result of the initiator name > not being in the igroup (see "igroup add" command on the filer).
Umm...I doubt it. The initiator name specified in '/etc/sysconfig/initiator' is the same as the one specified in /etc/initiatorname.iscsi (the one for the linux-iscsi initiator, which works). And this is the same setup I've had for several months now with the netapp and the linux-iscsi initiator with now problems. And I actually pulled the initiator name from the igroup just to be certain. Any other ideas? Regards, -- AJ Lewis Voice: 612-638-0500 Red Hat Inc. E-Mail: [EMAIL PROTECTED] 720 Washington Ave. SE, Suite 200 Minneapolis, MN 55414 Current GPG fingerprint = D9F8 EDCE 4242 855F A03D 9B63 F50C 54A8 578C 8715 Grab the key at: http://people.redhat.com/alewis/gpg.html or one of the many keyservers out there...
pgpeMWoIKroNj.pgp
Description: PGP signature
