On Thu, Mar 08, 2001 at 02:02:35PM -0800, rakesh rakesh wrote:
> Hi ,
> when i am trying to load the qlogicfc driver
> (lk-2.4.0) I get the following message-
> Link is up....
> > init_module: No
> > > such device
> > > Hint: insmod errors can be caused by incorrect
> > module parameters, including
> > > invalid IO or IRQ parameters
> I have one FC disk connected to the FC adapter ....
> Can anybody let me the solution to the problem.
> Its connected in P2P.
> Thanx in advance
AFAIK, P2P is not supported by the qlogic driver. But, you didn't say
what your problem is, so I'm just guessing.
robert
>
> --- Robert Read <[EMAIL PROTECTED]> wrote:
> > Well, this doesn't help you much, but it's working
> > here, and I also
> > have the adaptec driver loaded.
> >
> > On Wed, Mar 07, 2001 at 12:32:27PM +0100,
> > [EMAIL PROTECTED] wrote:
> > >
> > >
> > > Hi,
> > >
> > > is there somebody looking after the qlogicfc
> > driver?
> > > It seems to be broken in kernel version 2.4.2 and
> > > later (2.4.3-pre2).
> > >
> > > When I try to load it, I get the following
> > messages:
> > >
> >
> /lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o:
> > init_module: No
> > > such device
> > > Hint: insmod errors can be caused by incorrect
> > module parameters, including
> > > invalid IO or IRQ parameters
> > >
> >
> /lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o:
> > insmod
> > >
> >
> /lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o
> > failed
> > >
> >
> /lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o:
> > insmod qlogicfc
> > > failed
> > >
> > > It worked fine in kernel version 2.4.1 and
> > earlier.
> > >
> > > Thanks in advance ...
> > >
> > > Alexander Warmuth
> > > IBM Storage Solutions Group
> > > Advanced Technical Support Storage Area Networks
> > > Mainz, Germany
> > >
> > >
> > > -
> > > To unsubscribe from this list: send the line
> > "unsubscribe linux-scsi" in
> > > the body of a message to [EMAIL PROTECTED]
> > -
> > To unsubscribe from this list: send the line
> > "unsubscribe linux-scsi" in
> > the body of a message to [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
