Hi Neil,
When I try the following steps on kernel 2.6.16 I am getting the same errors
as on kernel 2.6.15.
# mdadm -Cv /dev/md0 --assume-clean --force --bitmap=/tmp/bitmap.txt
--bitmap-chunk=1024 -l5 -n4 /dev/sd{a,b,c,d}
Array gets created successfully.
# mdadm /dev/md0 -f /dev/sda
mdadm: set /dev/sda faulty in /dev/md0
# mdadm /dev/md0 -r /dev/sda
mdadm: hot remove failed for /dev/sda: Device or resource busy
# cat /proc/mdstat shows
Personalities : [raid5] [raid4]
md0 : active raid5 sdd[3] sdc[2] sdb[1] sda[0](F)
1465159488 blocks level 5, 64k chunk, algorithm 2 [4/3] [_UUU]
bitmap: 0/233 pages [0KB], 1024KB chunk, file: /tmp/bitmap.txt
unused devices: <none>
# mdadm -D /dev/md0 shows
/dev/md0:
Version : 00.90.03
Creation Time : Tue Apr 11 03:39:28 2006
Raid Level : raid5
Array Size : 1465159488 (1397.29 GiB 1500.32 GB)
Device Size : 488386496 (465.76 GiB 500.11 GB)
Raid Devices : 4
Total Devices : 4
Preferred Minor : 0
Persistence : Superblock is persistent
Intent Bitmap : /tmp/bitmap.txt
Update Time : Tue Apr 11 03:39:28 2006
State : clean, degraded
Active Devices : 3
Working Devices : 3
Failed Devices : 1
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : ee25e1fa:d1ee78d5:d63869c6:dd7cff82
Events : 0.1
Number Major Minor RaidDevice State
0 8 0 0 faulty spare rebuilding /dev/sda
1 8 16 1 active sync /dev/sdb
2 8 32 2 active sync /dev/sdc
3 8 48 3 active sync /dev/sdd
# tail -f /var/log/messages shows
Apr 11 03:40:47 localhost kernel: <4>md: cannot remove active disk sda from
md0 ...
Apr 11 03:41:29 localhost kernel: raid5: Disk failure on sda, disabling
device. Operation continuing on 3 devices
Apr 11 03:41:35 localhost kernel: md: cannot remove active disk sda from md0
...
-----Original Message-----
From: Neil Brown [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 11, 2006 1:52 PM
To: Yogesh Pahilwan
Cc: [email protected]
Subject: RE: Problem in creating RAID5 MD array with kernel 2.6.15
On Tuesday April 11, [EMAIL PROTECTED] wrote:
> Hi Neil,
>
> Actually I want to calculate the performance of a RAID5 MD array in
rebuild
> state.
>
> For doing this I do the following steps:
>
> # mdadm -f /dev/md0 /dev/sda
> mdadm: set /dev/sda faulty in /dev/md0
>
> # mdadm -r /dev/md0 /dev/sda
> mdadm: hot remove failed for /dev/sda: Device or resource busy
Hmmm.... That shouldn't happen. I think you have found a bug :-(
However I cannot trivially reproduce it.
- Can you reproduce this behaviour (mdadm -r failing) ?
- If so, can you list the steps?
- Can you reproduce on 2.6.16?
- Can you reproduce it without use a bitmap?
If you cannot reproduce it, please tell me as much as possible about
what led up to this situation. Do you add/fail other drives? Did you
create or mount a filesystem, etc.
Thanks,
NeilBrown
>
> # tail -f /var/log/messages shows
>
> Apr 11 01:48:11 localhost kernel: <1>raid5: Disk failure on sda,
disabling
> device. Operation continuing on 3 devices
> Apr 11 01:48:24 localhost ntpd[3540]: synchronized to LOCAL(0), stratum 10
> Apr 11 01:48:24 localhost ntpd[3540]: kernel time sync disabled 0041
> Apr 11 01:48:26 localhost kernel: md: cannot remove active disk sda from
md0
> ...
> Apr 11 01:49:26 localhost ntpd[3540]: synchronized to 10.8.0.8, stratum 3
> Apr 11 01:50:51 localhost kernel: md: cannot remove active disk sda from
md0
> ...
> Apr 11 01:51:58 localhost kernel: md: cannot remove active disk sda from
md0
> ...
> Apr 11 01:54:16 localhost kernel: md: cannot remove active disk sda from
md0
> ...
> Apr 11 01:57:11 localhost kernel: md: cannot remove active disk sda from
md0
> .
>
> I am not getting why I am not able to hot remove /dev/sda from /dev/md0?
>
>
> # mdadm -D /dev/md0
> /dev/md0:
> Version : 00.90.03
> Creation Time : Tue Apr 11 01:47:20 2006
> Raid Level : raid5
> Array Size : 1465159488 (1397.29 GiB 1500.32 GB)
> Device Size : 488386496 (465.76 GiB 500.11 GB)
> Raid Devices : 4
> Total Devices : 4
> Preferred Minor : 0
> Persistence : Superblock is persistent
>
> Intent Bitmap : /tmp/bitmap.txt
>
> Update Time : Tue Apr 11 01:47:20 2006
> State : clean, degraded
> Active Devices : 3
> Working Devices : 3
> Failed Devices : 1
> Spare Devices : 0
>
> Layout : left-symmetric
> Chunk Size : 64K
>
> UUID : 5ce49b71:e6083c2a:121b9ac2:cb675771
> Events : 0.1
>
> Number Major Minor RaidDevice State
> 0 8 0 0 faulty spare rebuilding /dev/sda
> 1 8 16 1 active sync /dev/sdb
> 2 8 32 2 active sync /dev/sdc
> 3 8 48 3 active sync /dev/sdd
>
> This output shows that RAID5 /dev/md0 is in the degraded mode?
>
> How should I rebuild this RAID5 so that I can calculate I/O performance
> while rebuilding RAID5 MD Array?
>
> Thanks,
> Yogesh
>
>
>
>
>
>
> -----Original Message-----
> From: Neil Brown [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, April 11, 2006 1:01 PM
> To: Yogesh Pahilwan
> Cc: [email protected]
> Subject: RE: Problem in creating RAID5 MD array with kernel 2.6.15
>
> On Tuesday April 11, [EMAIL PROTECTED] wrote:
> > Hi Neil,
> >
> > I have set --bitmap-chunk=1024 and RAID5 gets created successfully.
>
> Good.
>
> >
> > But why I will have to set --bitmap-chunk for big size devices such as
> 500GB
> > each in my case?
> >
> > What is the default value of --bitmap-chunk?
>
> 4, which is probably too low.
>
> For every 2048 chunks, md potentially needs to allocate one page.
> md also needs to allocate a table to hold all these pages.
>
> At a chunk size of 4K, your 500GB would use 125million chunks.
> That's 64000 pages - but these are only allocated on demand, and we can
> survive failure.
> However the table would need 4 bytes per page, or 250K
> Allocating a 250K stable is unlikely to succeed due to memory
> fragmentation.
>
> With 1024K chunks you only need 1K, which is easy.
>
> You could safely go down to 256K chunks but I'm not sure it would gain
> much.
>
> I have put a note on my mdadm todo list to choose a more sensible
> default chunk size which limits the number of chunks to 2million.
>
> NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
