On Tue, 2005-01-25 at 15:04, Guy wrote: > For a more stable array, build a RAID0 out of 2 RAID1 arrays. > > Like this: > > mdadm --create /dev/md1 --level=1 --chunk=4 --raid-devices=2 /dev/sdb1 > /dev/sdc1 > mdadm --create /dev/md2 --level=1 --chunk=4 --raid-devices=2 /dev/sdd1 > /dev/sde1 > mdadm --create /dev/md0 --level=0 --chunk=4 --raid-devices=2 /dev/md1 > /dev/md2 > > You can put a file system directly on /dev/md0 > > Are all of the disks on the same cable? > > Not sure about your booting issue. > > Guy >
Ya I did this setup as well. Still the same booting issue. Once it's booted I can run mdadm --assemble --scan and it will find just the stripe and then add it. I saw several people having this issue on a google search. But never any solutions. Brad Dameron SeaTab Software www.seatab.com - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
