On 04/12/2016 06:42 PM, Javier Martinez Canillas wrote:
> Hello,
> 
> This is a second version of an RFC patch series that adds MC input connector
> support to the tvp5150 driver. The first RFC version was [0].
> 
> The patches are RFC because a previous version was merged and later reverted
> since the approach was found to be inadequate. So I preferred to post this
> approach as RFC to discuss it first.
> 
> The main difference with v1 is that a single sink pad is used for the tvp5150
> (instead of using a pad per each input pin) as suggested by Mauro and Hans.
> 
> The mc_nextgen_test dot output after applying the series can be found at [1]
> and the graph png generated using the dot tool is at [2].
> 
> I tested these patches on an IGEPv2 by capturing using both Composite inputs.
> 
> [0]: https://www.mail-archive.com/linux-media@vger.kernel.org/msg95389.html
> [1]: http://hastebin.com/yiduhonome.tex
> [2]: http://i.imgur.com/EyFtVtJ.png?1
> 
> Best regards,
> Javier
> 
> Changes in v2:
> - Remove from the changelog a mention of devices that multiplex the
>   physical RCA connectors to be used for the S-Video Y and C signals
>   since it's a special case and it doesn't really work on the IGEPv2.
> - Use a single sink pad for the demod and map the connectors as entities
>   so the mux is made via links. Suggested by Mauro and Hans.
> 
> Javier Martinez Canillas (2):
>   [media] tvp5150: Add input connectors DT bindings
>   [media] tvp5150: Replace connector support according to DT binding
> 
>  .../devicetree/bindings/media/i2c/tvp5150.txt      |  59 ++++++++
>  drivers/media/i2c/tvp5150.c                        | 155 
> +++++++++++++++------
>  2 files changed, 170 insertions(+), 44 deletions(-)
> 

Any comments about this series?

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to