Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov...@gmail.com>
---
arch/arm/boot/dts/omap3-n900.dts | 140 +++++++++++++++++++++++++++++++++++++++
1 file changed, 140 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index cc4cab2..03e1613 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -177,6 +177,84 @@
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
io-channel-names = "temp", "bsi", "vbat";
};
+
+ rear_camera: camera@0 {
+ compatible = "linux,camera";
+
+ module {
+ model = "TCM8341MD";
+ sensor = <&cam1>;
+ focus = <&autofocus>;
+ };
+ };
+
+ front_camera: camera@1 {
+ compatible = "linux,camera";
+
+ module {
+ model = "VS6555";
+ sensor = <&cam2>;
+ };
+ };
+
+ video-bus-switch {
+ compatible = "video-bus-switch";
+
+ switch-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; /* 97 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi_switch_in: endpoint {
+ remote-endpoint = <&csi_isp>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi_switch_out1: endpoint {
+ remote-endpoint = <&csi_cam1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ csi_switch_out2: endpoint {
+ remote-endpoint = <&csi_cam2>;
+ };
+ };
+ };
+ };
+};
+
+&isp {
+ vdds_csib-supply = <&vaux2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_pins>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ csi_isp: endpoint {
+ remote-endpoint = <&csi_switch_in>;
+ bus-type = <3>; /* CCP2 */
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ lane-polarity = <0 0>;
+ clock-inv = <0>;
+ strobe = <0>;
+ crc = <0>;
+ };
+ };
+ };
};
&omap3_pmx_core {
@@ -341,6 +419,22 @@
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)
/* gpio 157 => cmt_bsi */
>;
};
+
+ camera_pins: pinmux_camera {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7)
/* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7)
/* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0)
/* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7)
/* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)
/* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)
/* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0)
/* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0)
/* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7)
/* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7)
/* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0)
/* cam_strobe */
+ >;
+ };
};
&i2c1 {
@@ -529,6 +623,28 @@
clock-frequency = <100000>;
+ cam2: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+
+ vana-supply = <&vaux4>;
+
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+
+ port {
+ csi_cam2: endpoint {
+ link-frequencies = /bits/ 64 <60000000>;
+ bus-type = <3>; /* CCP2 */
+ strobe = <0>;
+ clock-inv = <0>;
+ crc = <0>;
+
+ remote-endpoint = <&csi_switch_out2>;
+ };
+ };
+ };
+
tlv320aic3x: tlv320aic3x@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
@@ -738,6 +854,30 @@
st,max-limit-y = <32>;
st,max-limit-z = <32>;
};
+
+ cam1: camera@3e {
+ compatible = "toshiba,et8ek8";
+ reg = <0x3e>;
+
+ vana-supply = <&vaux4>;
+
+ clocks = <&isp 0>;
+ clock-names = "extclk";
+ clock-frequency = <9600000>;
+
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+ port {
+ csi_cam1: endpoint {
+ bus-type = <3>; /* CCP2 */
+ strobe = <1>;
+ clock-inv = <0>;
+ crc = <1>;
+
+ remote-endpoint = <&csi_switch_out1>;
+ };
+ };
+ };
};
&mmc1 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
