Em Mon, 21 Mar 2016 16:48:12 -0300
Javier Martinez Canillas <jav...@osg.samsung.com> escreveu:
> Hello Hans,
>
> On 03/21/2016 04:30 PM, Hans Verkuil wrote:
>
> [snip]
>
> >>>>
> >>>> Can you please provide an example of a media pipeline that user-space
> >>>> should
> >>>> use with this approach? AFAICT whatever PADs are created when
> >>>> initiliazing
> >>>> the PADs for an entity, will be exposed to user-space in the media graph.
> >>>>
> >>>> So I'm not understading how it will be used in practice. I don't mean
> >>>> that
> >>>> your approach is not correct, is just I'm not getting it :)
> >>>
> >>> Why would userspace need to use the pads? This is for legacy drivers
> >>> (right?)
> >>> where the pipeline is fixed anyway.
> >>>
> >>
> >> I asked because the user needs to setup the links in the media pipeline to
> >> choose which input connection will be linked to the tvp5150 decoder. But
> >> it
> >> doesn't matter if we are going with the single sink pad approach since the
> >> user will always do something like:
> >
> > Why? The user will use an application that uses ENUM/S/G_INPUT for this.
> > We're
> > talking legacy drivers ('interface centric drivers' would be a better
> > description)
> > where we don't even expose the v4l-subdevX device nodes. Explicitly
> > programming
> > a media pipeline is something you do for complex devices (embedded systems
> > and
> > the like). Not for simple and generally fixed pipelines. Utterly pointless.
> >
>
> Mauro was talking about legacy 'interface centric' PC-consumer's hardware but
> my test system is an embedded board that also has a tvp5150 decoder. The
> board has an OMAP3 and the tvp5150 is attached to the SoC ISP. Is this one:
>
> https://www.isee.biz/products/igep-expansion-boards/igepv2-expansion
Yeah, subdevs should be prepared to work with both "interface centric" and
"media controller centric" approaches.
Yet, I don't think using one sink pad for tvp5150 is a bad thing.
> As you can see, the board has 2 RCA connectors and each one is routed a
> tvp5150
> composite input and both connectors can be used for S-Video. So the user needs
> to setup the pipeline manually to choose which input connection to use.
Actually, on your tests, you were not able to make this work, nor
S-Video is officially supported by the manufacturer. So, in the
specific case of IGEPv2, I would not be adding a S-Video connector.
Btw, even on devices with an S-Video connector and tvp5150, at
least on my tests, the driver were not able to setup S-Video. It
seems that there's something more than just setting the mux.
-
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
