On Wed, Jan 6, 2016 at 1:27 PM, Schubert, Matthew R. (LARC-D319)[TEAMS2] <matthew.r.schub...@nasa.gov> wrote: > Hello, > > We are attempting to use a StarTech Video Capture cable (Part# SVID2USB2) > with our CentOS 6.7 machine with no success. The em28xx driver seems to load > but cannot properly ID the capture cable. Below are the outputs from "dmesg" > and "lsusb -v" run after plugging in the device. Any advice is appreciated.
Try adding "card=9" to the modprobe option. If that doesn't work than try "card=29". Most of those really cheap devices either have an saa7113 or tvp5150 video decoder, and one of those two board profiles should work. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
