The graph traversal algorithm currently uses two variable-length
arrays that are dynamically allocated at the stack:
drivers/media/media-entity.c:238:17: warning: Variable length array is
used.
drivers/media/media-entity.c:239:17: warning: Variable length array is
used.
Those are bad, specially if the number of pads for some entity would
be bigger than a certain amount, as it would cause a Linux stack
overflow.
We could just replace entity->num_pads by a define in order to solve
the above sparse warnings, but that would still prevent having entities
with a big number of pads. So, let's do the right thing and use a
kalloced var to store those ancillary bitmaps, e. g. put them at
struct media_device, and use an arbitrary big number that will work
for all currently known usecases.
Signed-off-by: Mauro Carvalho Chehab <mche...@osg.samsung.com>
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 153a46469814..02842d875809 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -235,8 +235,6 @@ __must_check int media_entity_pipeline_start(struct
media_entity *entity,
media_entity_graph_walk_start(&graph, entity);
while ((entity = media_entity_graph_walk_next(&graph))) {
- DECLARE_BITMAP(active, entity->num_pads);
- DECLARE_BITMAP(has_no_links, entity->num_pads);
unsigned int i;
entity->stream_count++;
@@ -250,8 +248,8 @@ __must_check int media_entity_pipeline_start(struct
media_entity *entity,
if (!entity->ops || !entity->ops->link_validate)
continue;
- bitmap_zero(active, entity->num_pads);
- bitmap_fill(has_no_links, entity->num_pads);
+ bitmap_zero(mdev->active, entity->num_pads);
+ bitmap_fill(mdev->has_no_links, entity->num_pads);
for (i = 0; i < entity->num_links; i++) {
struct media_link *link = &entity->links[i];
@@ -259,7 +257,7 @@ __must_check int media_entity_pipeline_start(struct
media_entity *entity,
? link->sink : link->source;
/* Mark that a pad is connected by a link. */
- bitmap_clear(has_no_links, pad->index, 1);
+ bitmap_clear(mdev->has_no_links, pad->index, 1);
/*
* Pads that either do not need to connect or
@@ -268,7 +266,7 @@ __must_check int media_entity_pipeline_start(struct
media_entity *entity,
*/
if (!(pad->flags & MEDIA_PAD_FL_MUST_CONNECT) ||
link->flags & MEDIA_LNK_FL_ENABLED)
- bitmap_set(active, pad->index, 1);
+ bitmap_set(mdev->active, pad->index, 1);
/*
* Link validation will only take place for
@@ -290,15 +288,16 @@ __must_check int media_entity_pipeline_start(struct
media_entity *entity,
}
/* Either no links or validated links are fine. */
- bitmap_or(active, active, has_no_links, entity->num_pads);
+ bitmap_or(mdev->active, mdev->active, mdev->has_no_links,
+ entity->num_pads);
- if (!bitmap_full(active, entity->num_pads)) {
+ if (!bitmap_full(mdev->active, entity->num_pads)) {
ret = -EPIPE;
dev_dbg(entity->parent->dev,
"\"%s\":%u must be connected by an enabled
link\n",
entity->name,
(unsigned)find_first_zero_bit(
- active, entity->num_pads));
+ mdev->active, entity->num_pads));
goto error;
}
}
diff --git a/include/media/media-device.h b/include/media/media-device.h
index 6e6db78f1ee2..1ac132af031b 100644
--- a/include/media/media-device.h
+++ b/include/media/media-device.h
@@ -32,6 +32,10 @@
struct device;
+/* Maximum number of pads per entity */
+
+#define MEDIA_MAX_PADS 512
+
/**
* struct media_device - Media device
* @dev: Parent device
@@ -78,6 +82,11 @@ struct media_device {
int (*link_notify)(struct media_link *link, u32 flags,
unsigned int notification);
+
+ /* private: ancillary bitmaps used by graph traversal algo */
+
+ DECLARE_BITMAP(active, MEDIA_MAX_PADS);
+ DECLARE_BITMAP(has_no_links, MEDIA_MAX_PADS);
};
/* Supported link_notify @notification values. */
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
