On 09/06/2015 07:30 PM, Mauro Carvalho Chehab wrote:
> Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_
> and add the backward compatibility bits.
>
> The changes at the .c files was generated by the following
> coccinelle script:
>
> @@
> -MEDIA_ENT_T_DVB_DEMUX
> +MEDIA_ENT_F_MPEG_TS_DEMUX
I'm not sure about the 'MPEG_' part here. I think that in general a transport
stream
can contain non-MPEG streams as well. Why not just say _F_TS_DEMUX?
> @@
> @@
> -MEDIA_ENT_T_DVB_TSOUT
> +MEDIA_ENT_F_DTV_TSOUT
Shouldn't this be MEDIA_ENT_F_IO?
> @@
> @@
> -MEDIA_ENT_T_DVB_CA
> +MEDIA_ENT_F_DTV_CA
> @@
> @@
> -MEDIA_ENT_T_DVB_NET_DECAP
> +MEDIA_ENT_F_DTV_NET_DECAP
>
> Signed-off-by: Mauro Carvalho Chehab <mche...@osg.samsung.com>
>
> diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
> index e925909bc99e..8527fc40e6a0 100644
> --- a/drivers/media/dvb-core/dvbdev.c
> +++ b/drivers/media/dvb-core/dvbdev.c
> @@ -229,7 +229,7 @@ static int dvb_create_tsout_entity(struct dvb_device
> *dvbdev,
> if (!entity->name)
> return ret;
>
> - entity->function = MEDIA_ENT_T_DVB_TSOUT;
> + entity->function = MEDIA_ENT_F_IO;
> pads->flags = MEDIA_PAD_FL_SINK;
>
> ret = media_entity_init(entity, 1, pads);
> diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h
> index d232cc680c67..90e90a6e62bf 100644
> --- a/include/uapi/linux/media.h
> +++ b/include/uapi/linux/media.h
> @@ -46,87 +46,86 @@ struct media_device_info {
> * Initial value to be used when a new entity is created
> * Drivers should change it to something useful
> */
> -#define MEDIA_ENT_T_UNKNOWN 0x00000000
> +#define MEDIA_ENT_F_UNKNOWN 0x00000000
>
> /*
> - * Base numbers for entity types
> + * Base number ranges for entity functions
> *
> - * Please notice that the huge gap of 16 bits for each base is overkill!
> - * 8 bits is more than enough to avoid starving entity types for each
> - * subsystem.
> - *
> - * However, It is kept this way just to avoid binary breakages with the
> - * namespace provided on legacy versions of this header.
> + * NOTE: those ranges and entity function number are spased just to
s/spased/phased/
> + * make easier to maintain this file. Userspace should not rely on
s/make/make it/
> + * the ranges to identify a group of function types, as newer
> + * functions can be added with any name within the full u32 range.
> */
> -#define MEDIA_ENT_T_DVB_BASE 0x00000000
> -#define MEDIA_ENT_T_V4L2_BASE 0x00010000
> -#define MEDIA_ENT_T_V4L2_SUBDEV_BASE 0x00020000
> -#define MEDIA_ENT_T_CONNECTOR_BASE 0x00030000
> +#define MEDIA_ENT_F_BASE 0x00000000
> +#define MEDIA_ENT_F_OLD_BASE 0x00010000
> +#define MEDIA_ENT_F_OLD_SUBDEV_BASE 0x00020000
>
> /*
> - * V4L2 entities - Those are used for DMA (mmap/DMABUF) and
> - * read()/write() data I/O associated with the V4L2 devnodes.
> + * DVB entities
> */
> -#define MEDIA_ENT_T_V4L2_VIDEO (MEDIA_ENT_T_V4L2_BASE + 1)
> - /*
> - * Please notice that numbers between MEDIA_ENT_T_V4L2_BASE + 2 and
> - * MEDIA_ENT_T_V4L2_BASE + 4 can't be used, as those values used
> - * to be declared for FB, ALSA and DVB entities.
> - * As those values were never actually used in practice, we're just
> - * adding them as backward compatibility macros and keeping the
> - * numberspace clean here. This way, we avoid breaking compilation,
> - * in the case of having some userspace application using the old
> - * symbols.
> - */
> -#define MEDIA_ENT_T_V4L2_VBI (MEDIA_ENT_T_V4L2_BASE + 5)
> -#define MEDIA_ENT_T_V4L2_SWRADIO (MEDIA_ENT_T_V4L2_BASE + 6)
> -
> -/* V4L2 Sub-device entities */
> -
> - /*
> - * Subdevs are initialized with MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN,
> - * in order to preserve backward compatibility.
> - * Drivers should change to the proper subdev type before
> - * registering the entity.
> - */
> -#define MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN MEDIA_ENT_T_V4L2_SUBDEV_BASE
> -
> -#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR (MEDIA_ENT_T_V4L2_SUBDEV_BASE +
> 1)
> -#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH (MEDIA_ENT_T_V4L2_SUBDEV_BASE +
> 2)
> -#define MEDIA_ENT_T_V4L2_SUBDEV_LENS (MEDIA_ENT_T_V4L2_SUBDEV_BASE + 3)
> - /* A converter of analogue video to its digital representation. */
> -#define MEDIA_ENT_T_V4L2_SUBDEV_DECODER (MEDIA_ENT_T_V4L2_SUBDEV_BASE +
> 4)
> - /* Tuner entity is actually both V4L2 and DVB subdev */
> -#define MEDIA_ENT_T_V4L2_SUBDEV_TUNER (MEDIA_ENT_T_V4L2_SUBDEV_BASE +
> 5)
> +#define MEDIA_ENT_F_DTV_DEMOD (MEDIA_ENT_F_BASE + 1)
> +#define MEDIA_ENT_F_MPEG_TS_DEMUX (MEDIA_ENT_F_BASE + 2)
> +#define MEDIA_ENT_F_DTV_CA (MEDIA_ENT_F_BASE + 3)
> +#define MEDIA_ENT_F_DTV_NET_DECAP (MEDIA_ENT_F_BASE + 4)
>
> -/* DVB entities */
> -#define MEDIA_ENT_T_DVB_DEMOD (MEDIA_ENT_T_DVB_BASE + 1)
> -#define MEDIA_ENT_T_DVB_DEMUX (MEDIA_ENT_T_DVB_BASE + 2)
> -#define MEDIA_ENT_T_DVB_TSOUT (MEDIA_ENT_T_DVB_BASE + 3)
> -#define MEDIA_ENT_T_DVB_CA (MEDIA_ENT_T_DVB_BASE + 4)
> -#define MEDIA_ENT_T_DVB_NET_DECAP (MEDIA_ENT_T_DVB_BASE + 5)
> -
> -/* Connectors */
> -#define MEDIA_ENT_T_CONN_RF (MEDIA_ENT_T_CONNECTOR_BASE)
> -#define MEDIA_ENT_T_CONN_SVIDEO (MEDIA_ENT_T_CONNECTOR_BASE + 1)
> -#define MEDIA_ENT_T_CONN_COMPOSITE (MEDIA_ENT_T_CONNECTOR_BASE + 2)
> +/*
> + * Connectors
> + */
> +#define MEDIA_ENT_F_CONN_RF (MEDIA_ENT_F_BASE + 21)
> +#define MEDIA_ENT_F_CONN_SVIDEO (MEDIA_ENT_F_BASE + 22)
> +#define MEDIA_ENT_F_CONN_COMPOSITE (MEDIA_ENT_F_BASE + 23)
> /* For internal test signal generators and other debug connectors */
> -#define MEDIA_ENT_T_CONN_TEST (MEDIA_ENT_T_CONNECTOR_BASE + 3)
> +#define MEDIA_ENT_F_CONN_TEST (MEDIA_ENT_F_BASE + 24)
> +
> +/*
> + * Don't touch on those. The ranges MEDIA_ENT_F_OLD_BASE and
> + * MEDIA_ENT_F_OLD_SUBDEV_BASE are kept to keep backward compatibility
> + * with the legacy v1 API.The number range is out of range by purpose:
> + * several previously reserved numbers got excluded from this range.
> + *
> + * Subdevs are initialized with MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN,
> + * in order to preserve backward compatibility.
> + * Drivers should change to the proper subdev type before
> + * registering the entity.
> + */
> +
> +#define MEDIA_ENT_F_IO (MEDIA_ENT_F_OLD_BASE + 1)
> +
> +#define MEDIA_ENT_F_CAM_SENSOR (MEDIA_ENT_F_OLD_SUBDEV_BASE +
> 1)
> +#define MEDIA_ENT_F_FLASH (MEDIA_ENT_F_OLD_SUBDEV_BASE + 2)
> +#define MEDIA_ENT_F_LENS (MEDIA_ENT_F_OLD_SUBDEV_BASE + 3)
> +#define MEDIA_ENT_F_ATV_DECODER (MEDIA_ENT_F_OLD_SUBDEV_BASE +
> 4)
> +#define MEDIA_ENT_F_TUNER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 5)
> +
> +#define MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN MEDIA_ENT_F_OLD_SUBDEV_BASE
>
> #ifndef __KERNEL__
> -/* Legacy symbols used to avoid userspace compilation breakages */
> +
> +/*
> + * Legacy symbols used to avoid userspace compilation breakages
> + *
> + * Those symbols map the entity function into types and should be
> + * used only on legacy programs for legacy hardware. Don't rely
> + * on those for MEDIA_IOC_G_TOPOLOGY.
> + */
> #define MEDIA_ENT_TYPE_SHIFT 16
> #define MEDIA_ENT_TYPE_MASK 0x00ff0000
> #define MEDIA_ENT_SUBTYPE_MASK 0x0000ffff
>
> -#define MEDIA_ENT_T_DEVNODE MEDIA_ENT_T_V4L2_BASE
> -#define MEDIA_ENT_T_V4L2_SUBDEV MEDIA_ENT_T_V4L2_SUBDEV_BASE
> -
> -#define MEDIA_ENT_T_DEVNODE_V4L MEDIA_ENT_T_V4L2_VIDEO
> -
> +#define MEDIA_ENT_T_DEVNODE MEDIA_ENT_F_OLD_BASE
> +#define MEDIA_ENT_T_DEVNODE_V4L MEDIA_ENT_F_IO
> #define MEDIA_ENT_T_DEVNODE_FB (MEDIA_ENT_T_DEVNODE + 2)
> #define MEDIA_ENT_T_DEVNODE_ALSA (MEDIA_ENT_T_DEVNODE + 3)
> #define MEDIA_ENT_T_DEVNODE_DVB (MEDIA_ENT_T_DEVNODE + 4)
> +
> +#define MEDIA_ENT_T_UNKNOWN MEDIA_ENT_F_UNKNOWN
> +#define MEDIA_ENT_T_V4L2_VIDEO MEDIA_ENT_F_IO
> +#define MEDIA_ENT_T_V4L2_SUBDEV MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
> +#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR MEDIA_ENT_F_CAM_SENSOR
> +#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH MEDIA_ENT_F_FLASH
> +#define MEDIA_ENT_T_V4L2_SUBDEV_LENS MEDIA_ENT_F_LENS
> +#define MEDIA_ENT_T_V4L2_SUBDEV_DECODER MEDIA_ENT_F_ATV_DECODER
> +#define MEDIA_ENT_T_V4L2_SUBDEV_TUNER MEDIA_ENT_F_TUNER
> #endif
>
> /* Entity flags */
>
Overall I really like this.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
