This is still a work in progress. Please ignore this patch. This went out
by mistake. My apologies.
Regards,
Prashant
On 09/06/15 10:46 pm, "Prashant Laddha (prladdha)" <prlad...@cisco.com>
wrote:
>Currently, if reduced blanking flag is set to true, cvt timings are
>calculated for reduced blanking version 2.
>
>To Do: extend the cvt options to inlcude rb v2.
>
>Signed-off-by: Prashant Laddha <prlad...@cisco.com>
>---
> utils/v4l2-ctl/v4l2-ctl-modes.cpp | 40
>+++++++++++++++++++++++++++++++--------
> 1 file changed, 32 insertions(+), 8 deletions(-)
>
>diff --git a/utils/v4l2-ctl/v4l2-ctl-modes.cpp
>b/utils/v4l2-ctl/v4l2-ctl-modes.cpp
>index 7422bc5..cfe4086 100644
>--- a/utils/v4l2-ctl/v4l2-ctl-modes.cpp
>+++ b/utils/v4l2-ctl/v4l2-ctl-modes.cpp
>@@ -52,6 +52,7 @@ static bool valid_params(int width, int height, int
>refresh_rate)
> */
>
> #define CVT_PXL_CLK_GRAN (250000) /* pixel clock granularity */
>+#define CVT_PXL_CLK_GRAN_RB_V2 (1000) /* granularity for reduced
>blanking v2*/
>
> /* Normal blanking */
> #define CVT_MIN_V_BPORCH (7) /* lines */
>@@ -77,6 +78,12 @@ static bool valid_params(int width, int height, int
>refresh_rate)
> #define CVT_RB_H_BPORCH (80) /* pixels */
> #define CVT_RB_H_BLANK (160) /* pixels */
>
>+/* Reduce blanking Version 2 */
>+#define CVT_RB_V2_H_BLANK 80 /* pixels */
>+#define CVT_RB_MIN_V_FPORCH 3 /* lines */
>+#define CVT_RB_V2_MIN_V_FPORCH 1 /* lines */
>+#define CVT_RB_V_BPORCH 6 /* lines */
>+
> static int v_sync_from_aspect_ratio(int width, int height)
> {
> if (((height * 4 / 3) / CVT_CELL_GRAN) * CVT_CELL_GRAN == width)
>@@ -148,6 +155,11 @@ bool calc_cvt_modeline(int image_width, int
>image_height,
> int interlace;
> int v_refresh;
> int pixel_clock;
>+ int clk_gran;
>+ bool rb_v2 = false;
>+
>+ rb_v2 = reduced_blanking ? true : false;
>+ clk_gran = rb_v2 ? CVT_PXL_CLK_GRAN_RB_V2 : CVT_PXL_CLK_GRAN;
>
> if (!valid_params(image_width, image_height, refresh_rate))
> return false;
>@@ -186,7 +198,7 @@ bool calc_cvt_modeline(int image_width, int
>image_height,
> active_h_pixel = h_pixel_rnd;
> active_v_lines = v_lines_rnd;
>
>- v_sync = v_sync_from_aspect_ratio(h_pixel, v_lines);
>+ v_sync = rb_v2 ? 8 : v_sync_from_aspect_ratio(h_pixel, v_lines);
>
> if (!reduced_blanking) {
> int tmp1, tmp2;
>@@ -235,6 +247,8 @@ bool calc_cvt_modeline(int image_width, int
>image_height,
>
> int vbi_lines;
> int tmp1, tmp2;
>+ int min_vbi_lines;
>+ int h_blank;
>
> /* estimate horizontal period. */
> tmp1 = HV_FACTOR * 1000000 -
>@@ -245,26 +259,36 @@ bool calc_cvt_modeline(int image_width, int
>image_height,
>
> vbi_lines = CVT_RB_MIN_V_BLANK * HV_FACTOR / h_period + 1;
>
>- if (vbi_lines < (CVT_RB_V_FPORCH + v_sync + CVT_MIN_V_BPORCH))
>- vbi_lines = CVT_RB_V_FPORCH + v_sync + CVT_MIN_V_BPORCH;
>+ if (rb_v2)
>+ min_vbi_lines = CVT_RB_V2_MIN_V_FPORCH + v_sync +
>CVT_RB_V_BPORCH;
>+ else
>+ min_vbi_lines = CVT_RB_V_FPORCH + v_sync +
>CVT_MIN_V_BPORCH;
>
>- total_h_pixel = active_h_pixel + CVT_RB_H_BLANK;
>+ if (vbi_lines < min_vbi_lines)
>+ vbi_lines = min_vbi_lines;
>
>- h_blank = CVT_RB_H_BLANK;
>+ h_blank = rb_v2 ? CVT_RB_V2_H_BLANK : CVT_RB_H_BLANK;
> v_blank = vbi_lines;
>
>+ total_h_pixel = active_h_pixel + h_blank;
>+
> h_sync = CVT_RB_H_SYNC;
>
> h_bp = h_blank / 2;
> h_fp = h_blank - h_bp - h_sync;
>
>- v_fp = CVT_RB_V_FPORCH;
>- v_bp = v_blank - v_fp - v_sync;
>+ if (rb_v2) {
>+ v_bp = CVT_RB_V_BPORCH;
>+ v_fp = v_blank - v_bp - v_sync;
>+ } else {
>+ v_fp = CVT_RB_V_FPORCH;
>+ v_bp = v_blank - v_fp - v_sync;
>+ }
> }
>
> pixel_clock = ((long long)total_h_pixel * HV_FACTOR * 1000000)
> / h_period;
>- pixel_clock -= pixel_clock % CVT_PXL_CLK_GRAN;
>+ pixel_clock -= pixel_clock % clk_gran;
>
> cvt->standards = V4L2_DV_BT_STD_CVT;
>
>--
>1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
