Hi Laurent,

On Sun, Mar 08, 2015 at 01:34:17AM +0200, Laurent Pinchart wrote:
> Hi Sakari,
> 
> Thank you for the patch.
> 
> (CC'ing linux-omap and Tony)

Thanks.

> On Saturday 07 March 2015 23:41:07 Sakari Ailus wrote:
> > The syscon register isn't part of the ISP, use it through the syscom driver
> > regmap instead. The syscom block is considered to be from 343x on ISP
> > revision 2.0 whereas 15.0 is assumed to have 3630 syscon.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ai...@iki.fi>
> > ---
> >  arch/arm/boot/dts/omap3.dtsi                |    2 +-
> >  arch/arm/mach-omap2/devices.c               |   10 ----------
> >  drivers/media/platform/omap3isp/isp.c       |   19 +++++++++++++++----
> >  drivers/media/platform/omap3isp/isp.h       |   19 +++++++++++++++++--
> >  drivers/media/platform/omap3isp/ispcsiphy.c |   20 +++++++++-----------
> 
> You might be asked to split the patch into two, let's see what Tony says.
> 
> >  5 files changed, 42 insertions(+), 28 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> > index 01b7111..fe0b293 100644
> > --- a/arch/arm/boot/dts/omap3.dtsi
> > +++ b/arch/arm/boot/dts/omap3.dtsi
> > @@ -183,7 +183,7 @@
> > 
> >             omap3_scm_general: tisyscon@48002270 {
> >                     compatible = "syscon";
> > -                   reg = <0x48002270 0x2f0>;
> > +                   reg = <0x48002270 0x2f4>;
> >             };
> > 
> >             pbias_regulator: pbias_regulator {
> > diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> > index 1afb50d..e945957 100644
> > --- a/arch/arm/mach-omap2/devices.c
> > +++ b/arch/arm/mach-omap2/devices.c
> > @@ -143,16 +143,6 @@ static struct resource omap3isp_resources[] = {
> >             .flags          = IORESOURCE_MEM,
> >     },
> >     {
> > -           .start          = OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE,
> > -           .end            = OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE 
> > + 3,
> > -           .flags          = IORESOURCE_MEM,
> > -   },
> > -   {
> > -           .start          = OMAP343X_CTRL_BASE + 
> > OMAP3630_CONTROL_CAMERA_PHY_CTRL,
> > -           .end            = OMAP343X_CTRL_BASE + 
> > OMAP3630_CONTROL_CAMERA_PHY_CTRL + 3,
> > -           .flags          = IORESOURCE_MEM,
> > -   },
> > -   {
> >             .start          = 24 + OMAP_INTC_START,
> >             .flags          = IORESOURCE_IRQ,
> >     }
> > diff --git a/drivers/media/platform/omap3isp/isp.c
> > b/drivers/media/platform/omap3isp/isp.c index 68d7edfc..4ff4bbd 100644
> > --- a/drivers/media/platform/omap3isp/isp.c
> > +++ b/drivers/media/platform/omap3isp/isp.c
> > @@ -51,6 +51,7 @@
> >  #include <linux/dma-mapping.h>
> >  #include <linux/i2c.h>
> >  #include <linux/interrupt.h>
> > +#include <linux/mfd/syscon.h>
> >  #include <linux/module.h>
> >  #include <linux/omap-iommu.h>
> >  #include <linux/platform_device.h>
> > @@ -94,8 +95,9 @@ static const struct isp_res_mapping isp_res_maps[] = {
> >                    1 << OMAP3_ISP_IOMEM_RESZ |
> >                    1 << OMAP3_ISP_IOMEM_SBL |
> >                    1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 |
> > -                  1 << OMAP3_ISP_IOMEM_CSIPHY2 |
> > -                  1 << OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE,
> > +                  1 << OMAP3_ISP_IOMEM_CSIPHY2,
> > +           .syscon_offset = 0xdc,
> > +           .phy_type = ISP_PHY_TYPE_3430,
> >     },
> >     {
> >             .isp_rev = ISP_REVISION_15_0,
> > @@ -112,8 +114,9 @@ static const struct isp_res_mapping isp_res_maps[] = {
> >                    1 << OMAP3_ISP_IOMEM_CSI2A_REGS2 |
> >                    1 << OMAP3_ISP_IOMEM_CSI2C_REGS1 |
> >                    1 << OMAP3_ISP_IOMEM_CSIPHY1 |
> > -                  1 << OMAP3_ISP_IOMEM_CSI2C_REGS2 |
> > -                  1 << OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL,
> > +                  1 << OMAP3_ISP_IOMEM_CSI2C_REGS2,
> > +           .syscon_offset = 0x2f0,
> > +           .phy_type = ISP_PHY_TYPE_3630,
> >     },
> >  };
> > 
> > @@ -2352,6 +2355,14 @@ static int isp_probe(struct platform_device *pdev)
> >             }
> >     }
> > 
> > +   isp->syscon = syscon_regmap_lookup_by_pdevname("syscon.0");
> > +   isp->syscon_offset = isp_res_maps[m].syscon_offset;
> > +   isp->phy_type = isp_res_maps[m].phy_type;
> 
> You could move those two lines after the error check to keep the check closer 
> to the source of error.

Ack.

> Apart from that,
> 
> Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>

Thanks for the acks!

-- 
Kind regards,

Sakari Ailus
e-mail: sakari.ai...@iki.fi     XMPP: sai...@retiisi.org.uk
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to