Reset the device when initializing it so it is in a good known state and the
assumed register settings matche the actual register settings.
Signed-off-by: Lars-Peter Clausen <l...@metafoo.de>
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
---
drivers/media/i2c/adv7180.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index cc05db9..eeb5a4a 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -30,6 +30,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <linux/mutex.h>
+#include <linux/delay.h>
#define ADV7180_REG_INPUT_CONTROL 0x0000
#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00
@@ -524,6 +525,9 @@ static int init_device(struct adv7180_state *state)
mutex_lock(&state->mutex);
+ adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
+ usleep_range(2000, 10000);
+
/* Initialize adv7180 */
/* Enable autodetection */
if (state->autodetect) {
@@ -696,14 +700,14 @@ static int adv7180_resume(struct device *dev)
struct adv7180_state *state = to_state(sd);
int ret;
- if (state->powered) {
- ret = adv7180_set_power(state, true);
- if (ret)
- return ret;
- }
ret = init_device(state);
if (ret < 0)
return ret;
+
+ ret = adv7180_set_power(state, state->powered);
+ if (ret)
+ return ret;
+
return 0;
}
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
