Hi, Alexandre
Thanks for the review.
On 12/20/2014 5:05 AM, Alexandre Belloni wrote:
On 18/12/2014 at 16:51:06 +0800, Josh Wu wrote :
According to v4l2 dt document, we add:
a camera host: ISI port.
a i2c camera sensor: ov2640 port.
to sama5d3xmb.dtsi.
In the ov2640 node, it defines the pinctrls, clocks and isi port.
In the ISI node, it also reference to a ov2640 port.
Signed-off-by: Josh Wu <josh...@atmel.com>
---
arch/arm/boot/dts/sama5d3xmb.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi
b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 0aaebc6..958a528 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -52,6 +52,29 @@
};
};
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_pck_as_mck
&pinctrl_sensor_power &pinctrl_sensor_reset>;
I've acked your previous patch but maybe it should be named
pinctrl_isi_pck1_as_mck to be clearer (you used the handle to pck1
below).
It's a good idea. Maybe I prefer to use the name: pinctrl_pck1_as_isi_mck ?
If you are ok with this name, in next version, I will add one more patch
in the series to do this.
And I will keep your acked-by in my previous patch.
Best Regards,
Josh Wu
+ resetb-gpios = <&pioE 24
GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioE 29
GPIO_ACTIVE_HIGH>;
+ /* use pck1 for the master clock of
ov2640 */
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint =
<&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
usart1: serial@f0020000 {
dmas = <0>, <0>; /* Do not use DMA for
usart1 */
pinctrl-names = "default";
@@ -60,6 +83,15 @@
};
isi: isi@f0034000 {
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ };
+ };
};
mmc1: mmc@f8000000 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
