On 2014-11-07 04:31:01, Olli Salonen wrote:
>Looks good to me. Only missing T982 support now?
>
>Reviewed-by: Olli Salonen <olli.salo...@iki.fi>
>
>-olli
>
Thanks for review.
Yes, it is only missing T982 for cx23885 bridge driver.
BR,
Max
>On Wed, 5 Nov 2014, Nibble Max wrote:
>
>> DVBSky S952 dvb-s/s2 dual PCIe card:
>> 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
>> 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
>> 3>rc: cx23885 integrated.
>>
>> Signed-off-by: Nibble Max <nibble....@gmail.com>
>> ---
>> drivers/media/pci/cx23885/cx23885-cards.c | 22 +++++++
>> drivers/media/pci/cx23885/cx23885-dvb.c | 99
>> ++++++++++++++++++++++++++++++-
>> drivers/media/pci/cx23885/cx23885-input.c | 3 +
>> drivers/media/pci/cx23885/cx23885.h | 1 +
>> 4 files changed, 124 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>> b/drivers/media/pci/cx23885/cx23885-cards.c
>> index 4b9cb07..4bad27d 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = {
>> .name = "DVBSky S950",
>> .portb = CX23885_MPEG_DVB,
>> },
>> + [CX23885_BOARD_DVBSKY_S952] = {
>> + .name = "DVBSky S952",
>> + .portb = CX23885_MPEG_DVB,
>> + .portc = CX23885_MPEG_DVB,
>> + },
>> };
>> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
>>
>> @@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = {
>> .subvendor = 0x4254,
>> .subdevice = 0x0950,
>> .card = CX23885_BOARD_DVBSKY_S950,
>> + }, {
>> + .subvendor = 0x4254,
>> + .subdevice = 0x0952,
>> + .card = CX23885_BOARD_DVBSKY_S952,
>> },
>> };
>> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
>> @@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
>> mdelay(60);
>> break;
>> case CX23885_BOARD_DVBSKY_T9580:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /* enable GPIO3-18 pins */
>> cx_write(MC417_CTL, 0x00000037);
>> cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
>> @@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> if (!enable_885_ir)
>> break;
>> dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
>> @@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
>> /* sd_ir is a duplicate pointer to the AV Core, just clear it */
>> dev->sd_ir = NULL;
>> @@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> if (dev->sd_ir)
>> cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
>> break;
>> @@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
>> ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
>> break;
>> + case CX23885_BOARD_DVBSKY_S952:
>> + ts1->gen_ctrl_val = 0x5; /* Parallel */
>> + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
>> + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
>> + ts2->gen_ctrl_val = 0xe; /* Serial bus */
>> + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
>> + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
>> + break;
>> case CX23885_BOARD_HAUPPAUGE_HVR1250:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
>> @@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
>> &dev->i2c_bus[2].i2c_adap,
>> "cx25840", 0x88 >> 1, NULL);
>> diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c
>> b/drivers/media/pci/cx23885/cx23885-dvb.c
>> index 3410ab8..2457b64 100644
>> --- a/drivers/media/pci/cx23885/cx23885-dvb.c
>> +++ b/drivers/media/pci/cx23885/cx23885-dvb.c
>> @@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend
>> *fe,
>> return 0;
>> }
>>
>> +static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
>> + fe_sec_voltage_t voltage)
>> +{
>> + struct cx23885_tsport *port = fe->dvb->priv;
>> + struct cx23885_dev *dev = port->dev;
>> +
>> + cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
>> +
>> + switch (voltage) {
>> + case SEC_VOLTAGE_13:
>> + cx23885_gpio_set(dev, GPIO_13);
>> + cx23885_gpio_clear(dev, GPIO_12);
>> + break;
>> + case SEC_VOLTAGE_18:
>> + cx23885_gpio_set(dev, GPIO_13);
>> + cx23885_gpio_set(dev, GPIO_12);
>> + break;
>> + case SEC_VOLTAGE_OFF:
>> + cx23885_gpio_clear(dev, GPIO_13);
>> + cx23885_gpio_clear(dev, GPIO_12);
>> + break;
>> + }
>> + /* call the frontend set_voltage function */
>> + return port->fe_set_voltage(fe, voltage);
>> +}
>> +
>> static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
>> u8 data, int *mem)
>> {
>> @@ -878,6 +904,19 @@ static const struct m88ds3103_config
>> dvbsky_s950c_m88ds3103_config = {
>> .agc = 0x99,
>> };
>>
>> +static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
>> + .i2c_addr = 0x68,
>> + .clock = 27000000,
>> + .i2c_wr_max = 33,
>> + .clock_out = 0,
>> + .ts_mode = M88DS3103_TS_SERIAL,
>> + .ts_clk = 96000,
>> + .ts_clk_pol = 0,
>> + .lnb_en_pol = 1,
>> + .lnb_hv_pol = 0,
>> + .agc = 0x99,
>> +};
>> +
>> static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
>> {
>> struct cx23885_dev *dev = (struct cx23885_dev *)device;
>> @@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port)
>> struct i2c_board_info info;
>> struct i2c_adapter *adapter;
>> struct i2c_client *client_demod = NULL, *client_tuner = NULL,
>> *client_ci = NULL;
>> + const struct m88ds3103_config *p_m88ds3103_config = NULL;
>> + int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
>> = NULL;
>> int mfe_shared = 0; /* bus not shared by default */
>> int ret;
>>
>> @@ -1849,6 +1890,61 @@ static int dvb_register(struct cx23885_tsport *port)
>>
>> port->i2c_client_tuner = client_tuner;
>> break;
>> + case CX23885_BOARD_DVBSKY_S952:
>> + switch (port->nr) {
>> + /* port b */
>> + case 1:
>> + i2c_bus = &dev->i2c_bus[1];
>> + p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
>> + p_set_voltage = dvbsky_t9580_set_voltage;
>> + break;
>> + /* port c */
>> + case 2:
>> + i2c_bus = &dev->i2c_bus[0];
>> + p_m88ds3103_config =
>> &dvbsky_s952_portc_m88ds3103_config;
>> + p_set_voltage = dvbsky_s952_portc_set_voltage;
>> + break;
>> + }
>> +
>> + /* attach frontend */
>> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
>> + p_m88ds3103_config,
>> + &i2c_bus->i2c_adap, &adapter);
>> + if (fe0->dvb.frontend == NULL)
>> + break;
>> +
>> + /* attach tuner */
>> + memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
>> + m88ts2022_config.fe = fe0->dvb.frontend;
>> + m88ts2022_config.clock = 27000000;
>> + memset(&info, 0, sizeof(struct i2c_board_info));
>> + strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
>> + info.addr = 0x60;
>> + info.platform_data = &m88ts2022_config;
>> + request_module(info.type);
>> + client_tuner = i2c_new_device(adapter, &info);
>> + if (client_tuner == NULL ||
>> + client_tuner->dev.driver == NULL)
>> + goto frontend_detach;
>> + if (!try_module_get(client_tuner->dev.driver->owner)) {
>> + i2c_unregister_device(client_tuner);
>> + goto frontend_detach;
>> + }
>> +
>> + /* delegate signal strength measurement to tuner */
>> + fe0->dvb.frontend->ops.read_signal_strength =
>> + fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
>> +
>> + /*
>> + * for setting the voltage we need to set GPIOs on
>> + * the card.
>> + */
>> + port->fe_set_voltage =
>> + fe0->dvb.frontend->ops.set_voltage;
>> + fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
>> +
>> + port->i2c_client_tuner = client_tuner;
>> + break;
>> default:
>> printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
>> " isn't supported yet\n",
>> @@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port)
>> break;
>> }
>> case CX23885_BOARD_DVBSKY_T9580:
>> - case CX23885_BOARD_DVBSKY_S950: {
>> + case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952: {
>> u8 eeprom[256]; /* 24C02 i2c eeprom */
>>
>> if (port->nr > 2)
>> diff --git a/drivers/media/pci/cx23885/cx23885-input.c
>> b/drivers/media/pci/cx23885/cx23885-input.c
>> index 7523d0a..a1f4894 100644
>> --- a/drivers/media/pci/cx23885/cx23885-input.c
>> +++ b/drivers/media/pci/cx23885/cx23885-input.c
>> @@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev
>> *dev, u32 events)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /*
>> * The only boards we handle right now. However other boards
>> * using the CX2388x integrated IR controller should be similar
>> @@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev
>> *dev)
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_TT_CT2_4500_CI:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /*
>> * The IR controller on this board only returns pulse widths.
>> * Any other mode setting will fail to set up the device.
>> @@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
>> case CX23885_BOARD_DVBSKY_T980C:
>> case CX23885_BOARD_DVBSKY_S950C:
>> case CX23885_BOARD_DVBSKY_S950:
>> + case CX23885_BOARD_DVBSKY_S952:
>> /* Integrated CX23885 IR controller */
>> driver_type = RC_DRIVER_IR_RAW;
>> allowed_protos = RC_BIT_ALL;
>> diff --git a/drivers/media/pci/cx23885/cx23885.h
>> b/drivers/media/pci/cx23885/cx23885.h
>> index f9cd0da..58c5038 100644
>> --- a/drivers/media/pci/cx23885/cx23885.h
>> +++ b/drivers/media/pci/cx23885/cx23885.h
>> @@ -97,6 +97,7 @@
>> #define CX23885_BOARD_DVBSKY_S950C 47
>> #define CX23885_BOARD_TT_CT2_4500_CI 48
>> #define CX23885_BOARD_DVBSKY_S950 49
>> +#define CX23885_BOARD_DVBSKY_S952 50
>>
>> #define GPIO_0 0x00000001
>> #define GPIO_1 0x00000002
>>
>> --
>> 1.9.1
>>
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
